|
|
|
SEDL / STP / STP792-EB
 |
---->
STP792
MiCon 82: Optimization of Processing, Properties, and Service Performance Through Microstructural Control
Abrams H, Clark E, Hood J, Seth B
Pages: 349
Published: 1983
Other books in this series
|
|
14 papers comprise this book's contents and are divided among three categories: Materials for Energy Generation Systems Materials for Energy Transport Systems Materials for Solar Energy Systems
Table of Contents
Introduction
Abrams H., Clark E., Hood J., Seth B.
Overview
Abrams H.
Discussion
Discussion—Section on Materials for Energy Generation Systems
Discussion—Section on Materials for Energy Transport Systems
Discussion—Section on Materials for Solar Energy Systems
Tailoring Ti-6Al-4V Alloy for Energy Applications
Jaffee R.
Effects of Impurity Segregation and Hydrogen on Intergranular Brittle Fracture in an Alloy Steel
Kameda J.
A Caustic Stress-Corrosion Cracking Evaluation of Thermally Treated Inconel Alloy 600 Steam Generator Tubing
Airey G., Vaia A.
Research Toward New Alloys for Generator Retaining Rings
Chang K., Morris J.
A Mechanistic Interpretation of the Relationship Between Temper Embrittlement and the Stress-Corrosion Cracking Susceptibility of Nickel-Chromium Steels
Bandyopadhyay N., Briant C., Emigh P., Ford F.
Interaction of Gage and Hardenability on the Properties of Quenched and Tempered 2¼Cr-1Mo Steel Plate
Swift R.
Application of Bainite and Ferrite-Martensite Structure for High-Strength Heavy-Gage Linepipe
Matsuda H., Nakasugi H., Ohashi M., Takechi H., Tamehiro H.
Effect of Microstructure on Sulfide-Stress-Cracking Resistance of High-Strength Casing Steels
Garber R., Sponseller D., Straatmann J.
Effect of Niobium and Vanadium on the Microstructure and Mechanical Properties of Submerged-Arc Welds Produced Under a Basic Flux in Carbon-Manganese Steels
Abson D., Hart P.
Improvement of Submerged-Arc Weld Heat-Affected Zone Toughness by Titanium Additions to Linepipe Steels
Godden M., Houghton D., McCutcheon D., McGrath J., Ruddle G., Weatherly G.
Variation in the Microstructure of Electrodeposited Black Chrome Solar Coatings
Pettit R., Sowell R., Sweet J.
Research on Sputter-Deposited Selective Absorber Coatings
Thornton J.
Analysis of Silvered Glass Reflectors Exposed to Controlled Environments
Lind M., Masterson K.
Development of Low-Cost Polymers for Solar Energy Applications
Chung S., Clayton A., Coulter D., Di Stefano S., Gupta A., Hong S., Laue E., Liang R., Oda K.
Index
Committee: E04
Paper ID: STP792-EB
DOI: 10.1520/STP792-EB
ISBN-EB: 978-0-8031-4858-1
 ASTM International is a member of CrossRef.
0-8031-0240-2
978-0-8031-0240-8
STP792-EB
|
