|
|
|
SEDL / STP / STP734-EB
This unique volume is an important step toward an integrated source of test methods and procedures for setting design allowables for composites and composite structures. The contributions grouped into four major areas include: New and Special Test Methods
Special Test Methods and Analysis
Design Allowables
Design Allowables for Special Applications.
Table of Contents
Introduction
Chamis C.
Summary
Chamis C.
A Single-Ply Transverse Tension Strength Test for Unidirectional Composites
Foye R.
Application of Four-Point Ring-Twist Test for Determining Shear Modulus of Filamentary Composites
Greszczuk L.
Compression Testing of Graphite/Epoxy Composite Materials
Clark R., Lisagor W.
Low-Velocity Impact Tests on Fibrous Composite Sandwich Structures
Sharma A.
Fracture Testing of Injection-Molded Glass and Carbon Fiber-Reinforced Thermoplastics
Darwish A., Mandell J., McGarry F.
On the Off-Axis and Angle-Ply Strength of Composites
Kim R.
Biaxial Testing of Graphite/Epoxy Laminates with Cracks
Daniel I.
A Comparative Study of Composite Shear Specimens Using the Finite-Element Method
Bergner H., Bowles D., Herakovich C.
An Evaluation of the Sandwich Beam Compression Test Method for Composites
Shuart M.
Stress Distribution in Sandwich Beams in Uniform Bending
Salamon N.
Developing Design Allowables for Composite Helicopter Structures
Maass D., Rich M.
Mechanical Characterization of PMR-15 Graphite/Polyimide Bolted Joints
Pipes R., Riegner D., Webster J., Wilson D.
Cost-Effective Mechanical Property Characterization
Suarez J.
Statistical Analysis of Fibrous Composite Strength Data
Tenn L.
Fitting Models to Composite Materials Fatigue Data
Sendeckyj G.
Mechanical Property Characterization of Intraply Hybrid Composites
Chamis C., Lark R., Sinclair J.
Experimental Study of Compression-Compression Fatigue of Graphite/Epoxy Composites
Grimes G.
Buckling of Composite Cylinders Under Combined Compression and Torsion—Theoretical/Experimental Correlation
Herakovich C., Johnson E.
Proof-Load Determination for Pressure Vessels Wound with Aramid Fiber
Hahn H.
Bolted Joint Design
Ramkumar R.
Environmental Effects on Composite Fracture Behavior
Porter T.
Effects of Liquids on the Stress-Rupture Lives of Fiber Glass-Reinforced Plastics
Hoa S.
Index
Committee: D30
Paper ID: STP734-EB
DOI: 10.1520/STP734-EB
ISBN-EB: 978-0-8031-4800-0
 ASTM International is a member of CrossRef.
0-8031-0700-5
978-0-8031-0700-7
STP734-EB
|
