|
|
|
SEDL / STP / STP700-EB
33 papers describe the developments in research as well as applications. Prediction methods, elastic-plastic analysis, J-Integral approach, and many other techniques are included.
Table of Contents
Introduction
Kaufman J.
Prediction Methods for Fatigue Crack Growth in Aircraft Material
Schijve J.
Fractographic Measurements of Crack-Tip Closure
Faral M., McGee W., Pelloux R.
Fatigue Crack Propagation in Nylon 66 Blends
Hertzberg R., Manson J., Skibo M.
Cyclic Inelastic Deformation Aspects of Fatigue-Crack-Growth Analysis
Leis B., Zahoor A.
Effect of Prestressing on Stress-Corrosion Crack Initiation in High-Strength Type 4340 Steel
Clark W.
Tensile Cracks in Creeping Solids
Rice J., Riedel H.
Evaluation of C* for the Characterization of Creep-Crack-Growth Behavior in 304 Stainless Steel
Saxena A.
Elastic-Plastic Fracture Mechanics for High-Temperature Fatigue Crack Growth
Sadananda K., Shahinian P.
Stress Intensity Factor Due to Parallel Impact Loading of the Faces of a Crack
Abou-Sayed I., Burgers P., Freund L.
A Critical Examination of a Numerical Fracture Dynamic Code
Emery A., Hodulak L., Kobayashi A.
Elastic-Plastic Analysis of Growing Cracks
Drugan W., Rice J., Sham T.
Direct Evaluation of J-Resistance Curves from Load Displacement Records
Ernst H., Joyce J., Paris P.
Estimation of J-Integral Uncertainty
Corman D.
Effects of Specimen Geometry on the J1-R Curve for ASTM A533B Steel
Gudas J., Joyce J., Vassilaros M.
Measurement of Crack Growth Resistance of A533B Wide Plate Tests
Garwood S.
A Stability Analysis of Circumferential Cracks for Reactor Piping Systems
Gamble R., Paris P., Tada H.
The Ubiquitous η Factor
Turner C.
A J-Integral Approach to Development of η-Factors
Ernst H., Paris P., Turner C.
Temperature Dependence of the Fracture Toughness and the Cleavage Fracture Strength of a Pressure Vessel Steel
Kotilainen H.
Statistical Characterization of Fracture in the Transition Region
Landes J., Shaffer D.
Quasi-Static Steady Crack Growth in Small-Scale Yielding
Dean R., Hutchinson J.
Fully Plastic Crack Solutions, Estimation Scheme, and Stability Analyses for the Compact Specimen
Kumar V., Shih C.
Crack Analysis of Power Hardening Materials Using a Penalty Function and Superposition Method
Aizawa T., Ando Y., Yagawa G.
Dynamic Finite Element Analysis of Cracked Bodies with Stationary Cracks
Mall S.
Mode I Crack Surface Displacements and Stress Intensity Factors for a Round Compact Specimen Subject to a Couple and Force
Gross B.
On the Equivalence Between Semi-Empirical Fracture Analyses and R-Curves
Orange T.
A Modification of the COD Concept and Its Tentative Application to the Residual Strength of Center Cracked Panels
Schwalbe K.
Development of Some Analytical Fracture Mechanics Models for Pipeline Girth Welds
de Wit R., Smith J.
Ductile Fracture Behavior of Wrought Steels
Cox E., Lawrence F.
Fracture Behavior of A36 Bridge Steels
Krishna G., Nishanian J., Roberts R.
Committee: E08
Paper ID: STP700-EB
DOI: 10.1520/STP700-EB
ISBN-EB: 978-0-8031-4770-6
 ASTM International is a member of CrossRef.
0-8031-0363-8
978-0-8031-0363-4
STP700-EB
|
