|
|
|
SEDL / STP / STP668-EB
The first major collection of papers devoted solely to the topic of elastic-plastic fracture. The papers present multiple approaches to this topic.
Table of Contents
Introduction
Landes J.
Summary
Landes J.
The Theory of Instability of the Tearing Mode of Elastic-Plastic Crack Growth
Ernst H., Paris P., Tada H., Zahoor A.
Stability Analysis of J-Controlled Crack Growth
Hutchinson J., Paris P.
Studies on Crack Initiation and Stable Crack Growth
Andrews W., deLorenzi H., Shih C.
Elastic-Plastic Fracture Mechanics for Two-Dimensional Stable Crack Growth and Instability Problems
Broek D., Hahn G., Kanninen M., Marschall C., Rosenfield A., Rybicki E., Stonesifer R.
A Numerical Investigation of Plane Strain Stable Crack Growth Under Small-Scale Yielding Conditions
Sorensen E.
On Criteria for J-Dominance of Crack-Tip Fields In Large-Scale Yielding
McMeeking R., Parks D.
A Finite-Element Analysis of Stable Crack Growth—I
Atluri S., Chen W., Nakagaki M.
A Comparison of Elastic-Plastic Fracture Parameters in Biaxial Stress States
Kfouri A., Miller K.
Numerical Study of Initiation, Stable Crack Growth, and Maximum Load, with a Ductile Fracture Criterion Based on the Growth of Holes
d'Escatha Y., Devaux J.
Initial Experimental Investigation of Tearing Instability Theory
Ernst H., Paris P., Tada H., Zahoor A.
Evaluation of Estimation Procedures Used in J-lntegral Testing
Clarke G., Landes J., Walker H.
An Evaluation of Elastic-Plastic Methods Applied to Crack Growth Resistance Measurements
Landes J., McCabe D.
Elastic-Plastic Fracture Toughness Based on the COD and J-Contour Integral Concepts
Dawes M.
J-Integral Determinations and Analyses for Small Test Specimens and Their Usefulness for Estimating Fracture Toughness
Le Poac P., Miannay D., Pelissier-Tanon A., Royer J., Tissot J.
Effect of Size on the J Fracture Criterion
Chell G., Milne I.
Determination of Fracture Toughness with Linear-Elastic and Elastic-Plastic Methods
Berger C., Keller H., Munz D.
Minimum Specimen Size for the Application of Linear-Elastic Fracture Mechanics
Munz D.
Thickness and Side-Groove Effects on J- and δ-Resistance Curves for A533-B Steel at 93°C
Andrews W., Shih C.
Computer Interactive JIc of Testing Navy Alloys
Gudas J., Joyce J.
Characterization of Plate Steel Quality Using Various Toughness Measurement Techniques
Wilson A.
Static and Dynamic Fibrous Initiation Toughness Results for Nine Pressure Vessel Materials
Server W.
Dynamic Fracture Toughness of ASME SA508 Class 2a Base and Heat-Affected-Zone Material
Logsdon W.
Tensile and Fracture Behavior of a Nitrogen-Strengthened, Chromium-Nickel-Manganese Stainless Steel at Cryogenic Temperatures
Reed R., Tobler R.
A Procedure for Incorporating Thermal and Residual Stresses into the Concept of a Failure Assessment Diagram
Chell G.
The COD Approach and Its Application to Welded Structures
Archer G., Dawes M., Harrison J., Kamath M.
Fracture Mechanics Analysis of Pipeline Girthwelds
Begley J., McHenry H., Read D.
An Elastic-Plastic R-Curve Description of Fracture in Zr-2.5Nb Pressure Tube Alloy
Clarke C., Simpson L.
Correlation of Structural Steel Fractures Involving Massive Plasticity
Macdonald B.
An Approximate Method of Elastic-Plastic Fracture Analysis for Nozzle Corner Cracks
Merkle J.
Elastic-Plastic Fracture Mechanics Analyses of Notches
Hammouda M., Miller K.
Size Effects on the Fatigue Crack Growth Rate of Type 304 Stainless Steel
Brose W., Dowling N.
Use of a Compact-Type Strip Specimen for Fatigue Crack Growth Rate Testing in the High-Rate Regime
Mowbray D.
Index
Committee: E08
Paper ID: STP668-EB
DOI: 10.1520/STP668-EB
ISBN-EB: 978-0-8031-4739-3
 ASTM International is a member of CrossRef.
0-8031-0330-1
978-0-8031-0330-6
STP668-EB
|
