|
|
|
SEDL / STP / STP660-EB
 |
STP660
Thermal Transmission Measurements of Insulation
Tye RP
Pages: 443
Published: 1978
|
|
This publication, Thermal Transmission Measurements of Insulation, contains papers presented at a symposium on Heat Transmission Measurements held in Philadelphia, Pa., 19-20 Sept. 1977. The symposium was sponsored by Committee C16 on Thermal and Cryogenic Insulation Materials of the American Society for Testing and Materials. R. P. Tye, Dynatech R/D Company, presided as symposium chairman and editor of this publication.
Table of Contents
Introduction
Tye R.
Summary
Tye R.
Reference Materials for Insulation Measurement Comparisons
Fibrous Insulating Materials as Standard Reference Materials at Low Temperatures
Bertasi M., Bigolaro G., De Ponte F.
An Interlaboratory Comparison of the ASTM C 335 Pipe Insulation Test
Hollingsworth M.
Does the Insulation Have a Thermal Conductivity? The Revised ASTM Test Standards Require an Answer
Pelanne C.
Natural Convective Heat Transfer in Permeable Insulation
Bankvall C.
Blown Cellulose Fiber Thermal Insulations: Part 1—Density of Cellulose Fiber Thermal Insulation in Horizontal Applications
Bomberg M., Shirtliffe C.
Blown Cellulose Fiber Thermal Insulations: Part 2—Thermal Resistance
Bomberg M., Shirtliffe C.
Measurement of the Thermal Resistance of Thick Low-Density Mineral Fiber Insulation
Barthe M., Degenne M., Klarsfeld S.
Analysis of the Applicability of the Hot-Wire Technique for Determination of the Thermal Conductivity of Diathermanous Materials
Fine H.
Thermal Conductivity Measurements on High-Temperature Fibrous Insulations by the Hot-Wire Method
Adams J., Jackson A., Millar R.
Thermal Conductivity of Refractories: Working with the Hot-Wire Method
Jeschke P.
Determination of the Thermal Conductivity of Refractory Insulating Materials by the Hot-Wire Method
Davis W.
Heat Transfer Versus Pitch Angle for Nonventilated, Triangular-Sectioned, Apex-Upward Air-Filled Spaces
Probert S., Thirst T.
Influence of Moisture and Moisture Gradients on Heat Transfer Through Porous Building Materials
Bomberg M., Shirtliffe C.
Laboratory and Field Investigations of Moisture Absorption and Its Effect on Thermal Performance of Various Insulations
Dechow F., Epstein K.
Light Transmission Measurements Through Glass Fiber Insulations
Pelanne C.
Fibrous Insulation Heat-Transfer Model
King C.
Heat Transfer in Refractory Fiber Insulations
Striepens A.
Pipe Insulation Testers
Jury S., McElroy D., Moore J.
A Calibrated/Guarded Hot-Box Test Facility
Linehan P., Miller R., Perrine E.
New High-Temperature Guarded Hot-Box Facility for Reflective Insulation
Allmon B., Rausch D., Wahle H.
A Calibrated Hot-Box Approach for Steady-State Heat-Transfer Measurements in Air Duct Systems
Lauvray T.
Evaluation of High-Temperature Pipe Insulations Using a 16-ln.-Diameter Pipe Test Apparatus
Rupp A., Sadler J., Steffen R., Svedberg R.
Forced Convection: Practical Thermal Conductivity in an Insulated Structure Under the Influence of Workmanship and Wind
Bankvall C.
Drift Measurement Technique Applied to Poor Conductors
Ashworth E., Ashworth T., Lacey W.
Index
Committee: C16
Paper ID: STP660-EB
DOI: 10.1520/STP660-EB
ISBN-EB: 978-0-8031-4729-4
 ASTM International is a member of CrossRef.
0-8031-0589-4
978-0-8031-0589-8
STP660-EB
|
