|
|
|
SEDL / STP / STP632-EB
 |
---->
STP632
Developments in Fracture Mechanics Test Methods Standardization
Brown WF, Kaufman JG
Pages: 294
Published: 1977
|
|
Ten papers update methods in field of fracture mechanics tests. Covered are quantitative Characterization of fracture resistance of metallic materials and test development using small specimens for tanking materials' fracture toughness.
Table of Contents
Introduction
Kaufman J.
Summary
Brown W.
Experience in Plane-Strain Fracture Toughness Testing Per ASTM Method E 399
Kaufman J.
Fracture Toughness Testing Using the C-Shaped Specimen
Kendall D., Underwood J.
Analysis of Radially Cracked Ring Segments Subject to Forces and Couples
Gross B., Srawley J.
Recent Developments in JIc Testing
Begley J., Landes J.
Compliance Calibration of Specimens Used in the R-Curve Practice
McCabe D., Sha G.
Heavy-Section Fracture Toughness Screening Specimen
Brown W., Donald J., Shannon J.
Sharply Notch Cylindrical Tension Specimen for Screening Plane-Strain Fracture Toughness. Part I: Influence of Fundamental Testing Variables on Notch Strength. Part II: Applications in Aluminum Alloy Quality Assurance of Fracture Toughness
Brown W., Bubsey R., Bucci R., Collis S., Jones M., Kaufman J., Kohm R.
Investigation of Some Problems In Developing Standards for Precracked Charpy Slow Bend Tests
Brown W., Bubsey R., Jones M., Succop G.
Estimation of KIc from Slow Bend Precracked Charpy Specimen Strength Ratios
Brown W., Succop G.
Fracture Testing with Surface Crack Specimens
Orange T.
Appendix I—Standard Method of Sharp-Notch Tension Testing of High-Strength Sheet Materials
Index
Committee: E08
Paper ID: STP632-EB
DOI: 10.1520/STP632-EB
ISBN-EB: 978-0-8031-4704-1
 ASTM International is a member of CrossRef.
0-8031-0321-2
978-0-8031-0321-4
STP632-EB
|
