|
|
|
SEDL / STP / STP617-EB
The Fourth Conference on Composite Materials: Testing and Design was held 3-4 May 1976 at Valley Forge, Pa. The American Society for Testing and Materials' Committee D30 on High Modulus Fibers and Their Composites sponsored the conference. J. G. Davis, Jr., National Aeronautics and Space Administration-Langley Research Center, served as conference chairman. Most of the papers presented at the eight sessions are included in this volume which complements the first, second, and third conference publications—ASTM STP 460, ASTM STP 497, and ASTM STP 546, Composite Materials: Testing and Design.
Table of Contents
Introduction
Davis J.
Fracture Resistance Characterization of Graphite/Epoxy Composites
Morris D., Hahn H.
An Experimental Study of the Fracture Behavior of Laminated Graphite/Epoxy Composites
Brinson H., Yeow Y.
Effect of Time at Load on Fatigue Response of [(0/ ± 45/90)s]2 T300/5208 Graphite-Epoxy Laminate
Sendeckyj G., Stalnaker H.
Preliminary Development of a Fundamental Analysis Model for Crack Growth in a Fiber Reinforced Composite Material
Kanninen M., Rybicki E., Griffith W.
Fatigue of Notched Fiber Composite Laminates: Analytical and Experimental Evaluation
Kulkarni S., McLaughlin P., Pipes R., Rosen B.
Delamination in Quasi-Isotropic Graphite-Epoxy Laminates
Reifsnider K., Henneke E., Stinchcomb W.
Structural Design Significance of Tension-Tension Fatigue Data on Composites
Grimes G.
Evaluation of Selected High-Temperature Thermoplastic Polymers for Advanced Composite and Adhesive Applications
Maximovich M.
Development of Multidirectional Fiber-Reinforced Plastics
Suezawa Y., Takemoto M., Takahashi S.
Acoustic Emission Response Characteristics of Metal Matrix Composites
Pipes R., Ballintyn N., Scott W., Carlyle J.
Compression Testing of Large Gage Length Composite Coupons
Ryder J., Black E.
Nondestructive Tests for Shear Strength Degradation of a Graphite-Epoxy Composite
Kaelble D., Dynes P.
Failure Analysis of the Split-D Test Method
Knight C.
Longitudinal Residual Stresses in Boron Fibers
Behrendt D.
Effect of Stacking Sequence on the Notched Strength of Laminated Composites
Whitney J., Kim R.
An Analysis Model for Spatially Oriented Fiber Composites
Rosen B., Chatterjee S., Kibler J.
Empirical Crippling Analysis of Graphite/Epoxy Laminated Plates
Spier E., Klouman F.
Reliability Prediction for Composites Under Periodic Proof Tests in Service
Yang J.
A Perturbation Solution for Interlaminar Stresses In Bidirectional Laminates
Hsu P., Herakovich C.
Evaluation of Composite Curing Stresses
Pagano N., Hahn H.
Lamination Residual Strains and Stresses in Hybrid Laminates
Daniel I., Liber T.
Tensile and Compressive Behavior of Borsic/Aluminum
Herakovich C., Davis J., Viswanathan C.
Boron/Aluminum Skins for the DC-10 Aft Pylon
Elliott S.
Charpy Impact of Unidirectional Graphite/Aramid/Epoxy Hybrid Composites
Helfinstine J.
Impact Damage in Graphite-Fiber-Reinforced Composites
Greszczuk L., Chao H.
Impact Response of Polymer-Matrix Composite Materials
Adams D.
An Analytical Method for Evaluation of Impact Damage Energy of Laminated Composites
Sun C.
Time-Temperature-Stress Dependence of Boron Fiber Deformation
DiCarlo J.
Effects of Themal Cycling on the Properties of Graphite-Epoxy Composites
Mazzio V., Mehan R.
Moisture Effects in Epoxy Matrix Composites
Browning C., Husman G., Whitney J.
Environmental Sensitivity Tests of Graphite-Epoxy Bolt Bearing Properties
Wilkins D.
Moisture Absorption and Desorption in Epoxy Composite Laminates
Shirrell C., Halpin J.
Committee: D30
Paper ID: STP617-EB
DOI: 10.1520/STP617-EB
ISBN-EB: 978-0-8031-4690-7
 ASTM International is a member of CrossRef.
0-8031-4490-3
978-0-8031-4490-3
STP617-EB
STP 617
|
