|
|
|
SEDL / STP / STP610-EB
 |
STP610
Stress Corrosion—New Approaches
Craig HL
Pages: 439
Published: 1976
|
|
The symposium on New Approaches to Stress Corrosion was presented at the Seventy-eighth Annual Meeting of the American Society for Testing and Materials held in Montreal, Canada, 22-27 June 1975. Committee G01 on Corrosion of Metals sponsored the symposium. H. L. Craig, Jr., University of Miami, presided as symposium chairman and editor of this publication.
Table of Contents
Introduction
Craig H.
Summary
Craig H.
Evaluation of a Proposed Standard Method of Testing for Susceptibility to Stress-Corrosion Cracking of High-Strength 7XXX Series Aluminum Alloy Products
Sprowls D., Summerson T., Ugiansky G., Epstein S., Craig H.
Air Pollution Effects on Stress Induced Intergranular Corrosion of 7005-T53 Aluminum Alloy
Haynie F.
Stress-Intensity Dependence of Stress-Corrosion Crack-Growth Rate in 7079-T651 Aluminum
Finnegan J., Hartt W.
Learning from Experience of the Stress-Corrosion Failure of High-Strength Aluminum Alloy Forgings
Cina B., Kaatz T.
Crack Growth in Heavy Section Titanium
Judy R., Goode R.
Constant Strain Rate Technique for Assessing Stress-Corrosion Susceptibility
Payer J., Berry W., Boyd W.
An Automated Method for Evaluating Resistance to Stress-Corrosion Cracking with Ring-Loaded Precracked Specimens
Kaufman J., Coursen J., Sprowls D.
An Evaluation of Rising Load KIscc Testing
Clark W., Landes J.
Stress-Corrosion Crack Growth in Surface-Cracked Panels of High-Strength Steels
Shahinian P., Judy R.
Evaluating Stress-Corrosion Crack-Propagation Rates in High-Strength Aluminum Alloys with Bolt Loaded Precracked Double-Cantilever-Beam Specimens
Sprowls D., Coursen J., Walsh J.
Activation Energy Dependence on Stress Intensity in Stress-Corrosion Cracking and Corrosion Fatigue
Bania P., Antolovich S.
Aqueous Stress-Corrosion Cracking of High-Toughness D6AC Steel
Gilbreath W., Adamson M.
Retardation of Crack Propagation for D6AC High-Strength, Low-Alloy Steel in Aqueous Media by Addition of Oxidizing Inhibitors
Parrish P., Chen C., Verink E.
Effects of Composition on Stress-Corrosion Cracking Resistance of Ultrahigh-Strength Steels
Waid G., Ault R.
Stress-Corrosion Cracking Properties of 17-4 PH Steel
Fujii C.
Corrosion Fatigue and Stress-Corrosion Cracking of High-Hardness Laminar Composite Steel
Chait R., Campbell M.
Stress-Corrosion Cracking Evaluation of Aerospace Bolting Alloys
Taylor E.
Corrosion Thresholds for Interference Fit Fasteners and Cold-Worked Holes
Kaneko R., Simenz R.
Interference Fits and Stress-Corrosion Failure
Hanagud S., Carter A.
Crevice Corrosion and Its Relation to Stress-Corrosion Cracking
Chen C., Froning M., Verink E.
Review of Recent Studies on the Mechanism of Stress-Corrosion Cracking in Austenitic Stainless Steels
Dean S.
Stress-Corrosion Cracking of Stainless Steels in Hydrogen Sulfide Solutions
Takemura S., Onoyama M., Ooka T.
Removal of Iron-Sulfide Deposits from Fracture Surfaces
Interrante C., Hicho G.
Hydrogen Induced Delayed Failure of Type 310 Stainless Steel Foils
Kolts J.
Effects of Ferrite and Sensitization on Intergranular and Stress-Corrosion Behavior of Cast Stainless Steels
Beck F., Juppenlatz J., Wieser P.
Effect of Inclusions on Sulfide Stress Cracking
Ohki T., Tanimura M., Kinoshita K., Tenmyo G.
Index
Committee: G01
Paper ID: STP610-EB
DOI: 10.1520/STP610-EB
ISBN-EB: 978-0-8031-4684-6
 ASTM International is a member of CrossRef.
0-8031-0580-0
978-0-8031-0580-5
STP610-EB
STP 610
|
