|
|
|
SEDL / STP / STP580-EB
 |
STP580
Composite Reliability
Wu EM
Pages: 625
Published: 1975
|
|
The symposium on Composite Reliability was presented in Las Vegas, Nev., 15-16 April 1974. The symposium was sponsored by Committee D30 on High Modulus Fibers and Their Composites, American Society for Testing and Materials, in cooperation with the American Institute of Aeronautics and Astronautics, American Society of Mechanical Engineers, and the American Institute of Mining, Metallurgical, and Petroleum Engineers. E. M. Wu, Washington University, presided as symposium chairman.
Table of Contents
Introduction
Wu E.
Some Approaches to Assessing Failure Probabilities of Redundant Structures
McCarthy J., Orringer O.
Probabilistic Design of Composite Structures
Maxwell R., Toland R., Johnson C.
Structural Integrity Assessment of Filament-Wound Components
Lenoe E., Neal D.
Statistical Analysis of Flaw Strength Spectra of High-Modulus Fibers
Phoenix S.
Evaluation of an Accelerated Characterization Technique for Reliability Assessment of Adhesive Joints
Berens A., West B.
Reliability Aspects of a Composite Bolted Scarf Joint
Reed D., Eisenmann J.
Shear Property Measurements of Adhesives in Composite Material Bonded Joints
Renton W., Vinson J.
Measurement of Thermal and Mechanical Properties of Graphiteepoxy Composites for Precision Applications
Freund N.
Evaluation of Adhesive-Bonded Joints in Housing Components of Glass Fiber-Reinforced Polyester Laminate
Masters L., Reichard T.
Vibration Testing as a Nondestructive Test Tool for Composite Materials
Adams R., Walton D., Flitcroft J., Short D.
Application of a Special X-Ray Nondestructive Testing Technique for Monitoring Damage Zone Growth in Composite Laminates
Chang F., Couchman J., Eisenmann J., Yee B.
Acoustic Emission from Stress Rupture and Fatigue of an Organic Fiber Composite
Hamstad M., Chiao T.
Spectrum Analysis of Acoustic Emissions from Boron-Aluminum Composites
Henneke E., Herring H.
Damage Analysis in Composite Materials
Rose J., Shelton W.
Optimization of the Thermal Shock Resistance of Carbon-Carbon Composites
Guess T., Butler B.
Kinetics of Environmental Degradation in Graphite-Epoxy Laminates
Kaelble D., Dynes P., Crane L., Maus L.
Stress Rupture of Glass-Epoxy Composites: Environmental and Stress Effects
Wu E., Ruhmann D.
Reliability of Composite Zero-Expansion Structures for Use in Orbital Environment
Berman L.
Temperature Dependence of the Complex Modulus for Fiber-Reinforced Materials
Heller R., Thakker A., Arthur C.
Prediction of Transverse Strength and Scatter in Test Data for Unidirectional Composites
Greszczuk L.
A Computational Procedure to Analyze Metal Matrix Laminates with Nonlinear Lamination Residual Strains
Chamis C., Sullivan T.
Measurement of Residual Strains in Boron-Epoxy and Glass-Epoxy Laminates
Daniel I., Liber T., Chamis C.
Reducing Variability in Composite Tensile-Strength Properties
Mills G., Brown G., Waterman D.
Compressive Strength of Fiber-Reinforced Composite Materials
Davis J.
Creep Analysis of Laminates
Foye R.
Composite Matrix Fatigue Crazing—Detection and Measurement
Schwabe J.
Stress-Rupture Strength and Microstructural Stability of W-Hf-C Wire-Reinforced Superalloy Composites
Petrasek D., Signorelli R.
Frequency Effects on Flawed-Composite Fatigue Reliability
Reifsnider K., Stinchomb W., Williams R., Turgay H.
Some Observations on the Dynamic Fracture Behavior of Carbon Fiber-strengthened Epoxy Resin
Beaumont P., Server W.
Impact Damage Effects on Boron-Aluminum Composites
Carlisle J., Crane R., Jaques W., Montulli L.
Molecular Correlations with Fracture in Fibers and Granular-Filled Composites
DeVries K., Lloyd B., Wilde T.
Determination of Fracture Strength in Orthotropic Graphite-Epoxy Laminates
Konish H., Cruse T.
Fracture Behavior of Unidirectionally Solidified Ti-Ti5Ge3 Eutectic Composites
Yue A., Kaba B.
Fatigue Crack Propagation Rates in Woven and Nonwoven Fiber Glass Laminates
Mandell J.
Fracture Behavior of Thornel 300/5208 Graphite-Epoxy Laminates—Part 1: Unnotched Laminates
Sendeckyj G., Richardson M., Pappas J.
Fatigue, Creep, and Impact Resistance of Aramid Fiber Reinforced Composites
Miner L., Wolffe R., Zweben C.
Thermal Conductivity of High-Modulus Carbon Fibers
Kalnin I.
Thermoelastic Expansion of Graphite-Epoxy Unidirectional and Angle-Ply Composites
Wang A., Pipes R., Ahmadi A.
Properties of Filamentary-Reinforced Composites at Cryogenic Temperatures
Kasen M.
Tensile Properties of an Ultrahigh-Strength Graphite Fiber in an Epoxy Matrix
Chiao T., Hamstad M., Jessop E.
Heat-Treatable Cladding for New Aluminum Alloy 7050-T76 Sheet
Staley J.
Committee: D30
Paper ID: STP580-EB
DOI: 10.1520/STP580-EB
ISBN-EB: 978-0-8031-4660-0
 ASTM International is a member of CrossRef.
0-8031-0309-3
978-0-8031-0309-2
STP580-EB
STP 580
|
