|
|
|
SEDL / STP / STP569-EB
 |
STP569
Fatigue of Composite Materials
Hancock JR
Pages: 333
Published: 1975
|
|
The symposium on Fatigue of Composite Materials was presented at December Committee Week of the American Society for Testing and Materials held in Bal Harbour, Fla., 3-4 Dec. 1973. Committee E09 on Fatigue sponsored the symposium in cooperation with the Institute of Metals Division Composites Committee of the American Institute of Mining, Metallurgical, and Petroleum Engineers. J. R. Hancock, Midwest Research Institute, presided as symposium chairman.
Table of Contents
Introduction
Discussion
Fatigue Crack Propagation Behavior of the Ni-Ni3 Cb Eutectic Composite
Hertzberg R., Mills W.
Fatigue Crack Propagation in 0°/90° E-Glass/Epoxy Composites
Mandell J., Meier U.
Reducing the Effect of Water on the Fatigue Properties of S-Glass Epoxy Composites
Cowling J., Gauchel J., Steg I.
Fatigue Crack Growth in Dual Hardness Steel Armor
Anctil A., Johnson H., Kula E.
Microcrack Growth in Graphite Fiber-Epoxy Resin Systems During Compressive Fatigue
Beaumont P., Kunz S.
Nonlinear Response of Boron/Aluminum Angleplied Laminates Under Cyclic Tensile Loading: Contributing Mechanisms and Their Effects
Chamis C., Sullivan T.
Effects of Frequency on the Mechanical Response of Two Composite Materials to Fatigue Loads
Marcus L., Reifsnider K., Stinchcomb W., Williams R.
Fatigue Behavior of Carburized Steel
Landgraf R., Richman R.
Fatigue and Shakedown in Metal Matrix Composites
Dvorak G., Tarn J.
Fatigue Failure Mechanisms in a Unidirectionally Reinforced Composite Material
Dharan C.
High Strain Fatigue in a Ni(Cr)-TaC Fibrous Eutectic
Henry M., Stoloff N.
Fatigue Behavior of an Ag3Mg-AgMg Eutectic Composite
Kim Y., Maurer G., Stoloff N.
Effects of Environment on the Fatigue of Graphite-Epoxy Composites
Sumsion H., Williams D.
Flexural-Fatigue Evaluation of Aluminum-Alloy and Kraft-Paper Honeycomb-Sandwich Beams
Bitzer T., Person N.
Foreign Object Damage and Fatigue Interaction in Unidirectional Boron/Aluminum-6061
Gray T.
Axial Fatigue Properties of Metal Matrix Composites
Christian J.
Debond Propagation in Composite-Reinforced Metals
Crews J., Everett R., Roderick G.
Realism in Fatigue Testing: The Effect of Flight-by-Flight Thermal and Random Load Histories on Composite Bonded Joints
Cox E., Shinozuka M., Wilkins D., Wolff R.
Reliability After Inspection
Davidson J.
Committee: E08
Paper ID: STP569-EB
DOI: 10.1520/STP569-EB
ISBN-EB: 978-0-8031-4652-5
 ASTM International is a member of CrossRef.
0-8031-0346-8
978-0-8031-0346-7
STP569-EB
|
