|
|
|
SEDL / STP / STP544-EB
 |
STP544
Heat Transmission Measurements in Thermal Insulations
Tye RP
Pages: 309
Published: 1974
|
|
The Symposium on Contributions of Basic Heat Transmission Measurements to the Design and Behavior of Thermal Insulation Systems was held at the American Society for Testing and Materials Headquarters in Philadelphia, Pa., on 16-17 April 1973. The symposium was sponsored by ASTM Committee C16 on Thermal and Cryogenic Insulating Materials. R. P. Tye, Dynatech R/D Company, presided as the symposium chairman.
Table of Contents
Introduction
Tye R.
What Property Do We Measure
Establishing Steady-State Thermal Conditions in Flat Slab Specimens
Shirtliffe C.
Mechanisms of Heat Transfer in Permeable Insulation and Their Investigation in a Special Guarded Hot Plate
Bankvall C.
Water Vapor Diffusion and Frost in Porous Materials
Auracher H.
Radiative Contribution to the Thermal Conductivity of Fibrous Insulations
Hughes T., Linford R., Schmitt R.
Predicting Spacecraft Multilayer Insulation Performance from Heat Transfer Measurements
Hagemeyer W., Stimpson L.
Design Criteria for Guarded Hot Plate Apparatus
De Ponte F., Di Filippo P.
Suitable Steady-State Methods for Measurement of Effective Thermal Conductivity in Rigid Insulations
Engelke W.
Thermal Conductance of Pipe Insulation—A Large-Scale Test Apparatus
Kimball L.
New Development in Design of Equipment for Measuring Thermal Conductivity and Heat Flow
Brendeng E., Frivik P.
Robinson Line-Heat-Source Guarded Hot Plate Apparatus
Flynn D., Hahn M., Robinson H.
Calibrated Hot Box: An Effective Means for Measuring Thermal Conductance in Large Wall Sections
Mumaw J.
Improving the Thermal Performance of the Ordinary Concrete Block
Ducharme E., Knickle H.
Some Recent Experimental Data on Glass Fiber Insulating Materials and Their Use for a Reliable Design of Insulations at Low Temperatures
Fournier D., Klarsfeld S.
Evacuated Load Bearing Thermal Insulation up to 800°C
Dickson D.
Thermal Conductivity of Evacuated Glass Beads: Line Source Measurements in a Large Volume Bead Bed Between 225 and 300 K
Langseth M., Ruccia F., Wechsler A.
High Performance Thermal Insulation for an Implantable Artificial Heart
Chi J., Stoner D., Svedberg R., Vojnovich T.
Study of Thermophysical Properties of Constructional Materials in a Temperature Range from 10 to 400 K
Bolshakov Y., Domorod L., Luikov A., Shashkov A., Tanaeva S., Vasiliev L.
Analysis and Measurement of the Heat Transmission of Multi-Component Insulation Panels for Thermal Protection of Cryogenic Liquid Storage Vessels
Bourne J., Tye R.
Appendix
Committee: C16
Paper ID: STP544-EB
DOI: 10.1520/STP544-EB
ISBN-EB: 978-0-8031-4638-9
 ASTM International is a member of CrossRef.
0-8031-0372-7
978-0-8031-0372-6
STP544-EB
|
