|
|
|
SEDL / STP / STP536-EB
 |
STP536
Progress in Flaw Growth and Fracture Toughness Testing
Kaufman J., Swedlow J., Corten H., Srawley J., Heyer R., Wessel E., Irwin G.
Pages: 486
Published: 1973
|
|
Table of Contents
Introduction
Kaufman J.
Application of Strip Model to Crack Tip Resistance and Crack Closure Phenomena
Buck O., Ho C., Marcus H.
Some Observations on Fracture under Combined Loading
Lindsey G.
Interaction of Cracks with Rigid Inclusions in Longitudinal Shear Deformation. II. Further Results
Sendeckyj G.
Local Stresses near Deep Surface Flaws under Cylindrical Bending Fields
Schroedl M., Smith C.
Prior to Failure Extension of Flaws in a Rate Sensitive Tresca Solid
Wnuk M.
Threshold for Fatigue Crack Propagation and the Effects of Load Ratio and Frequency
Paris P., Schmidt R.
Overload Effects on Subcritical Crack Growth in Austenitic Manganese Steel
Rice R., Stephens R.
Effect of Multiple Overloads on Fatigue Crack Propagation in 2024-T3 Aluminum Alloy
Hertzberg R., Roberts R., Trebules V.
Fatigue-Crack Growth under Variable-Amplitude Loading in ASTM A514-B Steel
Barsom J.
Effect of a Loading Sequence on Threshold Stress Intensity Determination
Dull D., Harrigan W., Raymond L.
Fatigue and Corrosion-Fatigue Crack Growth of 4340 Steel at Various Yield Strengths
Barsom J., Imhof E.
Fatigue Crack Propagation and Fracture Toughness of 5Ni and 9Ni Steels at Cryogenic Temperatures
Bucci R., Greene B., Paris P.
Some Further Results of J-Integral Analysis and Estimates
Merkle J., Paris P., Rice J.
A Comparison of the J-Integral Fracture Criterion with the Equivalent Energy Concept
Begley J., Landes J.
Analytical Applications of the J-Integral
Merkle J.
Experimental Verification of Lower Bound KIc Values Utilizing the Equivalent Energy Concept
Buchalet C., Mager T.
A Method for Measuring KIc at Very High Strain Rates
Curran D., Shockey D.
Influence of Stress Intensity Level during Fatigue Precracking on Results of Plane-Strain Fracture Toughness Tests
Kaufman J., Schilling P.
Influence of Sheet Thickness upon the Fracture Resistance of Structural Aluminum Alloys
Freed C., Stoop J., Sullivan A.
Plane-Stress Fracture Toughness and Fatigue-Crack Propagation of Aluminum Alloy Wide Panels
Wang D.
Fracture Toughness of Plain and Welded 3-In.-Thick Aluminum Alloy Plate
Kaufman J., Nelson F.
Dynamic Tear Tests of 3-In.-Thick Aluminum Alloys
Goode R., Judy R.
Structure of Polymers and Fatigue Crack Propagation
Hertzberg R., Manson J., Wu W.
Effects of Strain Gradients on the Gross Strain Crack Tolerance of A 533-B Steel
Merkle J., Randall P.
Applications of the Compliance Concept in Fracture Mechanics
Okamura H., Takano T., Watanabe K.
Fracture Mechanics Technology for Optimum Pressure Vessel Design
Bjeletich J., Morton T.
Failure Stress Levels of Flaws in Pressurized Cylinders
Duffy A., Eiber R., Kiefner J., Maxey W.
Experimentally Determined Shape Factors for Deep Part-Through Cracks in a Thick-Walled Pressure Vessel
Derby R.
Committee: E08
Paper ID: STP536-EB
DOI: 10.1520/STP536-EB
ISBN-EB: 978-0-8031-8151-9
 ASTM International is a member of CrossRef.
978-0-8031-6660-8
STP536-EB
|
