|
|
|
SEDL / STP / STP513-EB
 |
STP513
Stress Analysis and Growth of Cracks: Proceedings of the 1971 National Symposium on Fracture Mechanics: Part 1
Corten HT, Gallagher JP
Pages: 314
Published: 1972
|
|
The 1971 National Symposium on Fracture Mechanics was held at the University of Illinois, Urbana-Champaign, Ill., 31 August through 2 September 1971. H.T. Corten, Department of Theoretical and Applied Mechanics, University of Illinois, presided as general chairman. J.P. Gallagher, Experimental Mechanics Branch, Air Force Flight Dynamics Laboratory, Wright-Patterson AFB, served as arrangements chairman.
Table of Contents
Introduction
Stress Intensity Factor for an Elliptical Crack Approaching the Surface of a Plate in Bending
Kobayashi A., Shah R.
A Study of Local Stresses Near Surface Flaws in Bending Fields
Marrs G., Smith C.
Stress Intensity Factors for Surface Cracks in Bending
Grandt A., Sinclair G.
Stress Intensity Factors for Internally Pressurized Thick-Wall Cylinders
Underwood J.
Crack Shapes and Stress Intensity Factors for Edge-Cracked Specimens
Orange T.
Toward Assessing the Effects of Crack Front Curvature (CFC)
Ritter M., Swedlow J.
Some Crack Tip Finite Elements for Plane Elasticity
Wilson W.
Fatigue Crack Growth Data for Various Materials Deduced from the Fatigue Lives of Precracked Plates
Pook L.
Fatigue Threshold Crack Propagation in Air and Dry Argon for a Ti-6Al-4V Alloy
Anderson A., Bucci R., Hertzberg R., Paris P., Schmidt R.
Extensive Study of Low Fatigue Crack Growth Rates in A533 and A508 Steels
Bucci R., Clark W., Mager T., Paris P., Wessel E.
Fatigue Crack Propagation Growth Rates under a Wide Variation of ΔK for an ASTM A517 Grade F (T-1) Steel
Bucci R., Clark W., Paris P.
Fatigue Crack Propagation of D6ac Steel in Air and Distilled Water
Bucci R., Little C., Paris P.
The Effect of Frequency upon the Fatigue-Crack Growth of Type 304 Stainless Steel at 1000 F
James L.
Delay Effects in Fatigue Crack Propagation
Hertzberg R., Roberts R., von Euw E.
Fatigue Crack Growth Analysis of Pressurized Water Reactor Vessels
Mager T., Riccardella P.
Rayleigh Waves for Continuous Monitoring of a Propagating Crack Front
Buck O., Ho C., Marcus H., Thompson R.
Fracture Mechanics Consideration of Hydrogen Sulfide Cracking in High Strength Steels
Bucci R., Johnson H., Loushin L., Paris P.
Committee: E08
Paper ID: STP513-EB
DOI: 10.1520/STP513-EB
ISBN-EB: 978-0-8031-4615-0
 ASTM International is a member of CrossRef.
0-8031-0362-X
978-0-8031-0362-7
STP513-EB
|
