|
|
|
SEDL / STP / STP472-EB
 |
STP472
The Reaction Parameters of Lime
Committee C-7
Pages: 232
Published: 1970
|
|
Table of Contents
Introduction
Tadsen V.
Characterization of the Properties of Commercial Lime by Surface Area Measurements and Scanning Electron Microscopy
Eades J., Sandberg P.
Phase Equilibria and Thermodynamic Properties of Lime-Iron Oxide Melts Containing up to 30 Percent SiO2: 1450 and 1550 C Sections
Morris A., Timucin M.
X-Ray and Electron Microscope Studies of Calcined and Sulfated Limestones
Hunter S., McClellan G., Scheib R.
Influence of Lime in Mortar on the Expansion of Brick Masonry
Ritchie T.
Testing of Building Mortars Using the New British Standard Methods
Gillard R., Lee H.
Effects of Calcination Conditions on the Properties of Lime
Hatfield J., Mullins R.
Observations on the Solution of Calcium Oxide in Slag Systems
Derge G., Shegog J.
Characterization of Lime: A Comparison and Scaling Down of the Coarse Grain Titration Test and the ASTM Slaking Rate Test
Healy G., Schlitt W.
Crucible Test for Lime Reactivity in Slags
Limes R., Russell R.
Present Status and Technical Advances of Steelworks Lime for Basic Oxygen Furnaces in Germany
König G., Obst K., Stradtmann J., Ullrich W.
Curing of Cement-Lime Mortars
Davison J.
The Textural Evolution of Limestone Calcines
Eades J., McClellan G.
Committee: C07
Paper ID: STP472-EB
DOI: 10.1520/STP472-EB
ISBN-EB: 978-0-8031-6039-2
 ASTM International is a member of CrossRef.
0-8031-6193-X
978-0-8031-6193-1
STP472-EB
|
