|
|
|
SEDL / STP / STP176-EB
 |
STP176
Symposium on Impact Testing
Tatnall F.
Pages: 176
Published: 1956
|
|
Table of Contents
Introduction
Notched-Bar Testing—Theory and Practice
Hoyt S.
Transition Behavior in V-Notch Charpy Slow-Bend Tests
Hartbower C.
Effects of Manganese and Aluminum Contents on Transition Temperature of Normalized Nickel Steel
Armstrong T., Miller O.
Low-Temperature Transition of Normalized Carbon-Manganese Steels
Armstrong T., Warner L.
Effect of Specimen Width on the Notched Bar Impact Properties of Quenched-And-Tempered and Normalized Steels
Zeno R.
Reproducibility of Charpy Impact Test
Driscoll D.
Automatic Impact Testing from Room Temperature to −236 C
DeSisto T.
The Influence of Pendulum Flexibilities on Impact Energy Measurements
Bluhm J.
The Impact Tube: A New Experimental Technique for Applying Impulse Loads
Gebard G.
Longitudinal Impact Tests of Long Bars with a Slingshot Machine
Irwin L., Ramberg W.
Stress-Strain Relationships in Yarns Subjected to Rapid Impact Loading
McCrackin F., Schiefer H., Smith J., Stone W.
Shock Tester for Shipping Containers
Cross W., McWhirter M.
Shock Testing with the Rocket-Powered Pendulum
Hager R.
Properties of Concrete at High Rates of Loading
Watstein D.
Committee: E01
Paper ID: STP176-EB
DOI: 10.1520/STP176-EB
ISBN-EB: 978-0-8031-6912-8
 ASTM International is a member of CrossRef.
0-8031-6536-6
978-0-8031-6536-6
STP176-EB
|
