Durability of Building and Construction Sealants and Adhesives: 4th Volume

    Wolf Andreas
    Published: 2012

      Format Pages Price  
    PDF (56M) $139   ADD TO CART
    Hardcopy (shipping and handling) $139   ADD TO CART
    Hardcopy + PDF Bundle - Save 25%
    (shipping and handling)
    $208.50   ADD TO CART

    Twenty-five peer-reviewed papers provide the latest scientific research in the building and construction industry for all aspects of sealant and adhesive durability.

    Topics include:

    Laboratory Testing and Specialized Outdoor Exposure Testing—characterization of adhesive joints for hybrid steel-glass beams; in situ measurement of compression set in building sealants during outdoor aging; adhesive joints in glass and solar engineering; and more.

    Factors Influencing the Durability of Sealed Joints and Adhesive Fixing—durability of cold-bent insulating glass units; adhesion of elastomeric silicone sealants to polymeric substrates; mechanical characteristics of degraded silicone bonded point supports; glass unit corner loading; asphalt blistering on concrete bridges; interfacial durability of silicone adhesives in building applications.

    Development of New Test Methods and Performance-Based Specifications—quantification of surface degradation and evaluation of outdoor and accelerated exposure of construction sealants; introduction to ASTM C1736; sealed joint performance for selection of sealants suitable for autoclaved lightweight concrete panels; testing approach for structural glazing; and modulus changes during durability tests on building joint sealants.

    Field Experience with Sealed Joints and Adhesive Fixing—moisture sensitive adhesives and flooring adhesive failures and case studies of adhesive and rigid insulation board failures due to moisture in low sloped roofing assemblies.

    Performance under Seismic Loads—seismic racking test evaluation of silicone; evaluation of structural sealant in four-sided structural sealant glazing curtain wall system; and review of structural silicone glazing systems subjected to a mega-earthquake.

    Table of Contents

    Bond Strength Between Cast-in-Place Ultra-High-Performance- Concrete and Glass Fibre Reinforced Polymer Plates Using Epoxy Bonded Coarse Silica Sand
    Chen D., El-Hacha R.

    Characterization of Adhesive Joints for Hybrid Steel-Glass Beams by Means of Simplified Small Scale Tests
    Abeln B., Feldmann M., Preckwinkel E.

    Durability of Acrylic Sealants Applied to Joints of Autoclaved Lightweight Concrete Walls: Evaluation of Exposure Testing
    Enomoto N., Lacasse M., Miyauchi H., Murata S., Tanaka K.

    In Situ Measurement of Compression Set in Building Sealants During Outdoor Aging
    Hunston D., Hunt C., Lacher S., Schueneman G., White C.

    Preliminary Evaluation of the Mechanical Properties and Durability of Transparent Structural Silicone Adhesive (TSSA) for Point Fixing in Glazing
    Brasseur M., Carbary L., Sitte S., Wolf A.

    Adhesive Joints in Glass and Solar Engineering
    Vogt I., Weller B.

    Outline of Testing and Evaluation Program Used in Selection of Adhesives for Transparent Adhesive Joints in All-Glass Load-Bearing Structures
    Nicklisch F., Prautzsch V., Vogt I., Weller B.

    A Systematic Approach to the Study of Accelerated Weathering of Building Joint Sealants
    Filliben J., Hunston D., Pintar A., Schueneman G., Tan K., White C.

    Durability of Cold-Bent Insulating-Glass Units
    Bergers M., Besserud K., Black A., Carbary L., Mazurek A., Misson D., Rubis K.

    The Mechanism of Adhesion Improvement of Elastomeric Silicone Sealants to Difficult-to-Bond Polymeric Substrates through Reactive or Interpenetrating Molecular Brushes
    Gutowski W., Li S., Toikka G.

    Mechanical Characteristics of Degraded Silicone Bonded Point Supports
    Hagl A.

    Glass Unit Corner Loading—Key Parameter in Durability
    Dieterich O., Hagl A.

    Mechanisms of Asphalt Blistering on Concrete Bridges
    Hailesilassie B., Partl M.

    Ways of Improving the Interfacial Durability of Silicone Adhesives in Building Applications
    Maton I., Vandereecken P.

    Attempt at Quantification of Surface Degradation and Evaluation of Relationship between Outdoor and Accelerated Exposure of Construction Sealants
    Enomoto N., Ito A., Tanaka K.

    Development of a Non-Destructive Evaluation Practice of Installed Weatherproofing Sealant Joints Using a Rolling Device—An Introduction to ASTM C 1736
    Huff D.

    Weathering Evaluation of Structural Silicone Sealants Used in Korea
    Hahn K., Jung J., Lee H.

    Evaluation of Sealed Joint Performance for the Selection of Sealants Suitable for Use in Autoclaved Lightweight Concrete Panels
    Enomoto N., Lacasse M., Miyauchi H., Murata S., Tanaka K.

    Potential of Dynamic-Mechanical Analysis Toward a Complementary Material and System Testing Approach for Structural Glazing
    Recknagel C.

    A Test Method for Monitoring Modulus Changes during Durability Tests on Building Joint Sealants
    Hunston D., Tan K., White C.

    Moisture Sensitive Adhesives and Flooring Adhesive Failures
    Hopps E., Nelson P.

    Case Studies of Adhesive and Rigid Insulation Board Failures due to Moisture in Low Sloped Roofing Assemblies
    Piteo N., Rutila D., Slick D.

    Seismic Racking Test Evaluation of Silicone Used in a Four-Sided Structural Sealant Glazed Curtain Wall System
    Broker K., Fisher S., Memari A.

    Evaluation of the Structural Sealant for Use in a Four-Sided Structural Sealant Glazing Curtain-Wall System for a Hospital Building
    Broker K., Fisher S., Krumenacker C., Memari A., Modrich R.

    A Review of the Behavior of Structural Silicone Glazing Systems Subjected to a Mega-Earthquake
    Bull E., Cholaky J.

    Author and Subject Index

    Subject Index

    Committee: C24

    DOI: 10.1520/STP1545-EB

    ISBN-EB: 978-0-8031-7557-0

    ISBN-13: 978-0-8031-7531-0

    ASTM International is a member of CrossRef.