|
|
|
SEDL / STP / STP1534-EB
 |
STP1534
Film and Nucleate Boiling Processes
Prabhu K., Kobasko Nikolai
Pages: 435
Published: 2012
|
|
Eighteen peer-reviewed papers provide the latest research on heat quenching technologies, including:
• Mechanism of film and nucleate boiling processes
• Calculating the duration of transient nucleate boiling mode
• Accuracy of cooling curves and cooling rate measurement
• Results of investigations based on noise control systems
• Real and effective heat transfer coefficients
Table of Contents
A Volume of Fluid Phase Change Model on Adaptive Octree Grids
Akhtar M., Kleis S.
CFD-Simulation of Film Boiling at Steel Cooling Process
Keiski R., Kulju T., Martin D., Muurinen E., Pyykkönen J.
Enhancement of Heat Transfer Characteristics of Transformer Oil by Addition of Aluminium Nanoparticles
Prabhu K., Rajesh E.
Modeling and Simulation of Film and Transitional Boiling Processes on a Metallic Cylinder During Quenching
Fritsching U., Stark P.
Correlation Between Chemical Composition of Steel, Optimal Hardened Layer, and Optimal Residual Stress Distribution
Kobasko N.
Duration of the Transient Nucleate Boiling Process and Its Use for the Development of New Technologies
Kobasko N.
Effect of Accuracy of Temperature Measurements on Determination of Heat Transfer Coefficient during Quenching in Liquid Media
Kobasko N.
Intensive Quenching of Steel Parts and Tools in Water Salt Solutions of Optimal Concentration
Dobryvechir V., Kobasko N., Moskalenko A., Protsenko L.
Microstructure and Hardness Prediction at the Core of Steel Parts of Any Configuration during Quenching
Guseynov S., Kobasko N.
Experimental Investigation of the Onset of Subcooled Nucleate Boiling in an Open-Pool Nuclear Research Reactor
Costa A., Mesquita A., Pereira C., Reis P., Veloso M.
Boiling Heat Transfer of Butanol Aqueous Solution-Augmentation of Critical Heat Flux
Nishiguchi S., Shoji M.
Heat Transfer Stages Recognition by Boiling Acoustic During Quenching
Grum J., Ravnik F.
Boiling Heat Transfer: An Overview of Longstanding and New Challenges
Shekriladze I.
Modeling and Simulation of the Heat and Mass Transfer Characteristics of Binary Mixtures for Boiling Flow Applications
Srinivasan V., Wang D.
Application of Numerical Methods to Simulate Direct Immersion Quenching Process
Greif D., Srinivasan V., Suffa M., Wang D.
Modeling Vertical Subcooled Boiling Flows at Low Pressures
Cheung S., Ho M., Tu J., Yeoh G.
Forced Convective Boiling of Ethylene Glycol/Water Mixtures Inside a Small Tube
France D., Routbort J., Yu W.
Bubble Dynamics and Heat Transfer in Pool Boiling on Wires at Different Gravity
Wan S., Zhao J.
Author and Subject Index
Committee: D02
Paper ID: STP1534-EB
DOI: 10.1520/STP1534-EB
ISBN-EB: 978-0-8031-8895-2
 ASTM International is a member of CrossRef.
978-0-8031-7520-4
STP1534-EB
|
