|
|
|
SEDL / STP / STP1526-EB
 |
STP1526
Fatigue and Fracture Mechanics: 37th Volume
Kalluri Sreeramesh, McGaw Michael, Neimitz Andrzej
Pages: 690
Published: 2011
Other books in this series
|
|
Thirty-nine peer-reviewed papers provide the latest research on fatigue and fracture mechanics. Topics cover:
• Advanced Master Curve approaches to the EURO fracture toughness data set
• Analysis of fracture mechanisms of ferritic steels at low temperatures
• Weibull stress model to predict effects of weld strength mismatch on cleavage fracture toughness
• Non local multiaxial fatigue approach to account for stress gradient effect on fatigue strength
• Effects of microstructure on incipient fatigue and fretting crack processes in Al-Cu-Li alloys
• Importance of residual stresses and surface roughness regarding fatigue of titanium forgings
• Fatigue crack growth simulation in components with random defects
• Fatigue initiation modeling of 316LN steel based on non local plasticity theory
• Temperature calibration techniques for TMF testing
• Residual strain effects on bridging stress of cracked and delaminated fiber metal laminates
• Assessment of cumulative axial and torsional fatigue in a cobalt-base superalloy
• And much more!
Table of Contents
On the Beauty of Analytical Models for Fatigue Crack Propagation and Fracture—A Personal Historical Review
Schwalbe K.
Investigation of Transition Fracture Toughness Variation within the Thickness of Reactor Pressure Vessel Forgings
Leenaers A., Lucon E., Scibetta M., Vandermeulen W.
More Accurate Approximation of J-Integral Equation for Evaluating Fracture Resistance Curves
Joyce J., Zhu X.
Application of Advanced Master Curve Approaches to the EURO Fracture Toughness Data Set
Lucon E., Scibetta M.
Revisit of ASTM Round-Robin Test Data for Determining R Curves of Thin-Sheet Materials
Leis B., Zhu X.
The Analysis of Fracture Mechanisms of Ferritic Steel 13HMF at Low Temperatures
Galkiewicz J., Neimitz A.
A Weibull Stress Model to Predict Effects of Weld Strength Mismatch on Cleavage Fracture Toughness
Ruggieri C.
Fatigue Initiation Modeling of 316LN Steel Based on Nonlocal Plasticity Theory
Fandeur O., Rey C., Schwartz J.
Mechanical Conditioning of Superelastic Nitinol Wire for Improved Fatigue Resistance
Schaffer J.
Creep-Fatigue Relationships in Electroactive Polymer Systems and Predicted Effects in an Actuator Design
Henslee I., Ihlefeld C., Vinogradov A.
Effects of Microstructure on the Incipient Fatigue and Fretting Crack Processes in Al-Cu-Li Alloys
Buffiere J., Danielou A., Delacroix J., Fouvry S.
Development of a Sliding-Rolling Contact Fatigue Tester
Dvorak G., Mitton B., Zahui M.
Determination of ΔKth by Compression Pre-Cracking in a Structural Steel
Carboni M., Patriarca L., Regazzi D.
Crack-Closure Behavior of 7050 Aluminum Alloy near Threshold Conditions for Wide Range in Load Ratios and Constant Kmax Tests
Newman J., Yamada Y.
Definition of the Influence of Pore Size on the Fatigue Limit Using Short Crack Propagation Experiments
Eichlseder W., Leitner H., Oberwinkler C.
Fatigue Crack Propagation Behavior of an Inertia Friction Welded α/β Titanium Alloy
Baxter G., Bowen P., Dungey C., Halford T., Pardhi Y.
Fatigue Crack Propagation in SAW Seam Welds of API 5L X42 Steel Pipe in the Radial Short Direction
Herrera D., Ramírez A., Velázquez J.
Fatigue from an Induced Defect: Experiments and Application of Different Multiaxial Fatigue Approaches
Leopold G., Nadot Y.
Effect of Cladding on Biaxially Loaded Underclad Part-Through Cracks
Houben T., Lucon E., Scibetta M.
An Assessment of Cumulative Axial and Torsional Fatigue in a Cobalt-Base Superalloy
Bonacuse P., Kalluri S.
A Non Local Multiaxial Fatigue Approach to Account for Stress Gradient Effect Applied to Crack Initiation in Fretting
Amargier R., Chambon L., Fouvry S., Poupon C.
Experimental and Numerical Analyses of Fatigue Behavior of Welded Cruciform Joints
Cognard J., Erny C., Korner M., Thévenet D.
Importance of Residual Stresses and Surface Roughness regarding Fatigue of Titanium Forgings
Eichlseder W., Oberwinkler B., Riedler M.
Fatigue Assessment of Brazed T-Joints Based on Damage Tolerance Including Residual Stress Effects
Leinenbach C., Schindler H.
Residual Strain Effects on Bridging Stress of Cracked and Delaminated Fiber Metal Laminates
Smith S., Wang J.
Elastic-Plastic Stress Analysis of Cold-Worked Pin-Loaded Holes
Daniewicz S., Ismonov S., Newman J.
The Influence of Elastic Follow-Up on the Integrity of Structures
Hadidi-Moud S., Smith D.
Lifetime Calculation of Thermo-Mechanically Loaded Materials (Al, Cu, Ni, and Fe Alloys) Based on Empirical Methods
Eichlseder W., Koeberl H., Winter G.
Mesh-Free Solution of Two-Dimensional Edge Crack Problems under Thermo-Mechanical Load
Bhasin V., Khan I., Mishra B., Pant M., Sharma K., Singh I.
Temperature Calibration Techniques for TMF Testing
Beres W., Dudzinski D., Kersey R.
Fatigue Crack Growth Simulation in Components with Random Defects
Härkegård G., Shirani M.
Cohesive Zone Modeling of Initiation and Propagation of Multiple Cracks in Hard Thin Surface Coatings
Homberg K., Laukkanen A., Ronkainen H., Wallin K.
Modeling of Crack Propagation in Weld Beam-to-Column Connections Submitted to Cyclic Loading with a Cohesive Zone Model
Duchêne L., Habraken A., Lequesne C., Plumier A.
Author Index
Subject Index
Committee: E08
Paper ID: STP1526-EB
DOI: 10.1520/STP1526-EB
ISBN-EB: 978-0-8031-8678-1
 ASTM International is a member of CrossRef.
978-0-8031-7512-9
STP1526-EB
|
