SEDL / STP / STP1523-EB
Quenching and Cooling, Residual Stress and Distortion Control
Canale Lauralice, Narazaki Michiharu
Fifty-nine peer-review papers focus on various issues related to quenching and cooling, residual stress, and distortion control of ferrous and non-ferrous metals.
Modeling and Simulation
Distortion and Residual Stresses
Quenchants and Quenching
Cooling Curve Analysis Methodologies
Table of Contents
Experimental Technique for Heat Transfer Measurements on Fast Moving Sprayed Surfaces
Bellerova H., Pohanka M., Raudensky M.
Accurate Determination of Surface Heat Fluxes during Quenching Characterized by Boiling Water Heat Transfer
Daun K., Wells M.
Heat Transfer during Quenching and Assessment of Quench Severity—A Review
Fernandes P., Prabhu K.
Formulation of a Guideline for the Determination of Heat Transfer Coefficient during Gas Quenching
Lohrmann M., Luebben T., Segerberg S., Sommer P.
Determination of Surface Heat Transfer Coefficients of Cr12MoV Steel Cylinder during High-Speed Gas Quenching at Atmospheric Pressure
Cheng H., Hou J., Hou L., Li J., Li Z.
Enhancement and Local Regulation of Metal Quenching Using Atomized Sprays
Alam U., Krol J., Schmidt J., Specht E.
The Effect of Agitation and Quenchant Temperature on the Heat Transfer Coefficients for 6061 Aluminum Alloy Quenched in Distilled Water
Fontecchio M., Maniruzzaman M., Sisson R.
A Review on Modeling and Simulation of Quenching
Şimşir C., Gür C.
Modeling of Quenching and Tempering Induced Phase Transformations in Steels
Chandrasekar S., Farris T., Jin L., Rajeev P.
Improving Control of a Quenching Process by Coupling Analysis Methods
Aronov M., Banka A., Ferguson B., Franklin J., Freborg A., Li Z.
Generalized Equation for Cooling Time Evaluation and Its Verification by CFD Analysis
Kobasko N., Krukovskyi P., Yurchenko D.
Computer Simulation of Quenched Steel Working Stress
Hanza S., Iljkić D., Smoljan B.
A Novel Approach to Model Moving Heat Sources
Fischer F., Krempaszky C., Očenášek J., Werner E.
Analysis of Stress Concentration around Inclusions Due to Thermally Induced Strain to the Steel Matrix
Allazadeh M., DeArdo A., Garcia C., Lovell M.
Considering the Body-Centered Cubic Lattice Parameter of α-Fe Alloys versus Concentrations of Solved Elements
Application of Thermodynamics and Kinetics in the Designing of New Type TRIP Steels Concerning Al and P Effects
He Y., Huang S., Li L., Van der Biest O., Vleugels J., Wang L.
Model of Solid State Transformations of Ductile Cast Iron GJS-600
Runser V., Schulze V.
Using Polyalkylene Glycol Quenchants to Effectively Control Distortion and Residual Stresses in Heat Treated Aluminum Alloys
Minimizing Machining Distortion in Aluminum Alloys through Successful Application of Uphill Quenching—A Process Overview
Explanation of the Origin of Distortion and Residual Stress in Carburized Ring Using Computer Simulation
Arimoto K., Funatani K., Yamanaka S.
The Analysis and Control of Distortion in Carbonitrided and Nitrocarburized Thin-Shelled Plain Carbon Steel Automotive Powertrain Components
Bauerle P., Bowers R., Campagna V., Northwood D., Sun X.
The Effect of Core and Carburized Surface Microstructural Stability on Residual Stress Evolution during Tempering
Couto A., di Monte M., Vatavuk J.
Explanation on the Origin of Distortion in Induction Hardened Ring Specimens by Computer Simulation
Arimoto K., Horino T., Ikuta F., Jin C., Tamura S.
Optimum Strategies to Reduce Residual Stresses and Distortion during the Metal Quenching Process
Bertram A., Kaymak Y., Nallathambi A., Specht E.
Numerical Simulation of Residual Stresses in Quenched Steel Bodies Using Subroutines to Represent TTT and CCT Diagrams
Bortoleto E., Cuppari M., de Souza R., Lagatta C., Machado I.
Prediction of Distortion of Automotive Pinion Gears during Quenching Using CFD and FEA
Ferguson B., Kumar A., Li Z., MacKenzie D., Metwally H., Paingankar S.
Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of Any Shape
Liščić B., Singer S., Smoljan B.
Correlation between Thermal and Mechanical Properties of the 10NiCr11
Bouhafs M., Ghrib T., Yacoubi N.
An Efficient Numerical Algorithm for the Prediction of Thermal and Microstructure Fields during Quenching of Steel Rods
Ali S., Hamed M., Lightstone M.
Starch-Based Quenchants as an Eco-Friendly Alternative to Quenching Oil
Comparison of Structure and Quenching Performance of Vegetable Oils
Augustinho S., de Campos Franceschini Canale L., de Souza E., Fernandes M., Totten G.
Severity of Quenching and Kinetics of Wetting of Nanofluids and Vegetable Oils
Jagannath V., Prabhu K.
An Investigation on Quenching Performance of Hot Alkaline Bath
Askari M., Rassizadehghani J., Raygan S.
A Feasibility Study of the Use of Bismuth Bath to Replace Lead Bath as the Quenching Media for Steel Heat-Treating
Ru J., Wang Z.
Spray Quenching in Induction Hardening Applications
Technology and Applications of Alternately Timed Quenching Technology
Chen N., Xu J., Zhou S., Zuo X.
One More Discussion “What is Intensive Quenching Process?”
Aronov M., Kobasko N., Powell J., Totten G.
Energy Efficient and Eco-friendly Intensively Quenched Limited Hardenability Low Alloy Steels
An Overview of Technology and Equipment for Hardening of Large Steel Parts
Deyneko L., Dobryvechir V., Kobasko N., Litvinenko E.
Accelerated Cooling of Steel Plates: The Time Has Come
Dolabela da Silveira J., Gorni A.
Overview of Pearlitic Rail Steel: Accelerated Cooling, Quenching, Microstructure, and Mechanical Properties
Mohapatra G., Sahay S., Totten G.
Water and Polymer Quenching of Aluminum Alloys: A Review of the Effect of Surface Condition, Water Temperature, and Polymer Quenchant Concentration on the Yield Strength of 7075-T6 Aluminum Plate
Bronzini C., Canale A., Canale L., Sarmiento G., Totten G.
Quenching Homogeneity and Intensity Improvement in Batch Mode High Pressure Gas Quenching
Fritsching U., Schmidt R.
Gas-Cooling of Multiple Short Inline Disks in Flow along Their Axis
Lior N., Papadopoulos D.
Numerical Simulation of the Mechanical Properties of Cr12 Steel during Gas Quenching
Cheng H., Hou L., Li J., Li Z.
Enhanced Hardenability through Application of Magnetic Fields
A New Method to Study the Effect of Cooling Rate on the Decomposition of Austenite in Advanced High Strength Sheet Steels
Ahn Y., Cho K., DeArdo A., Garcia C., Hua M., Lee J.
Quenchant Characterization by Cooling Curve Analysis
Canale L., Luo X., Totten G., Yao X.
Cooling Characteristic Test of Quenching Media
A Complete System for Testing and Evaluation of Quenchants and Quenching Systems
Bodin J., Felde I., Kristoffersen H., Troell E.
Effects of Cooling Rate Fluctuation on Cooling and Transformation Behavior of Steel upon Direct Quenching
Li J., Luo X.
Correlation between Cooling Curves Obtained with a Silver Probe and Quenching Properties of 5140 Steel Bars
Su L., Wang R., Wang Y.
Measurement of the Cooling Power of Polyethylene Glycol Aqueous Solutions Used as Quenching Media
Ikkene R., Koudil Z., Mouzali M.
Evolution of Quench Factor Analysis: A Review
Canale L., Kavalco P.
Analysis of the Segerberg Hardening Power Equation
Chun-huai C., Jing-en Z.
The Influence of Surface Temperature on Rewetting Behavior During Immersion Quenching of Hollow and Solid Cylinders
Frerichs F., Luebben T.
Dilatometric Analysis to Study Aging of Aluminum Alloys
Derudi U., Gerosa R., Rivolta B.
Optimization of the Heat Treatment of a 17-4 PH Stainless Steel by Dilatometric Technique
Gerosa R., Rivolta B., Sala A.
Paper ID: STP1523-EB
ASTM International is a member of CrossRef.