|
|
|
SEDL / STP / STP1522-EB
 |
STP1522
Twelfth International Symposium on Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres
Barthélémy Hervé, Steinberg Theodore, Binder Christian, Smith Sarah
Pages: 509
Published: 2009
Other books in this series
|
|
Twenty-eight peer-reviewed papers cover:
• Ignition and combustion of metals and non-metals
• Oxygen compatibility of components and systems
• Analysis of ignition and combustion
• Failure analysis and safety
• Aerospace and industry oxygen applications
• And more! STP 1522 provides a diverse source of new information to the air separation industry, oxygen manufacturers, manufacturers of components for oxygen and other industrial gases service, manufacturers of materials intended for oxygen and other industrial gases service, and users of oxygen and oxygen-enriched atmospheres. It covers the aerospace, medical, industrial gases, chemical processing, steel and metals refining industries, as well as to military, commercial, and recreational diving.
Table of Contents
Keynote—Materials Selection for Oxidizer Service—Successes and Challenges
Slusser J.
Promoted Ignition-Combustion behavior of Cobalt and Nickel Alloys in Oxygen-Enriched Atmospheres
Million J., Samant A., Zawierucha R.
Defining the Flammability of Cylindrical Metal Rods through Characterization of the Thermal Effects of the Ignition Promoter
Lynn D., Sparks K., Steinberg T., Stoltzfus J.
A Proposed Qualitative Framework for Heterogeneous Burning of Metallic Materials: The “Melting Rate Triangle”
Steinberg T., Ward N.
Ignition of Contaminated Aluminum by Impact in Liquid Oxygen—Influence of Oxygen Purity
Crayssac F., Longuet O., Werlen E., Willot F.
Verification of the ASTM G-124 Purge Equation
Davis S., Herald S., Robbins K.
Determination of Burn Criterion for Promoted Combustion Testing
Lynn D., Sparks K., Steinberg T., Stoltzfus J.
Promoted Ignition Testing of Metallic Filters in High-Pressure Oxygen
Chiffoleau G., Fielding J., Newton B., Odom G.
Oxygen Compatibility of Brass-Filled PTFE Compared to Commonly Used Fluorinated Polymers for Oxygen Systems
Davis S., Frisby P., Herald S.
Ignition Sensitivity of Nonmetallic Materials in Oxygen-Enriched Air (NITROX): A Never Ending Story in SCUBA Diving?
Binder C., Brock T., Hesse O., Lehné S., Tillack T.
The Importance of Quality Assurance and Batch Testing on Nonmetallic Materials Used for Oxygen Service
Arlt K., Binder C., Brock T., Hartwig P., Hesse O., Tillack T.
Identification and Quantification of Combustion Products Released by Non-Metallic Materials Used for Medical Oxygen Equipment
Barthélémy H., Bruat J., Carré M., Lombard S., Longuet O., Schaaff J.
Determination of Time Required for Materials Exposed to Oxygen to Return to Reduced Flammability
Harper S., Hirsch D., Smith S.
Effect of Oxygen Concentration on Autogenous Ignition Temperature and Pneumatic Impact Ignitability of Nonmetallic Materials
Smith S.
Liquid Oxygen Rotating Friction Ignition Testing of Aluminum and Titanium with Monel® and Inconel® for Rocket Engine Propulsion System Contamination Investigatio
Peralta S., Rosales K., Stoltzfus J.
Electrical Arc Ignition Testing for Common Handheld Electrical Devices in Oxygen-Enriched Atmosphere
Gallus T., Smith S., Sparks K.
High Pressure Quick Disconnect Particle Impact Tests
Rosales K., Stoltzfus J.
Advanced Crew Escape Suits (ACES) Particle Impact Test
Rosales K., Stoltzfus J.
Good Practices for Avoiding Fires in Steel Mill Oxygen Systems
Brophy B., Chiffoleau G., Forsyth E., Newton B.
Oxygen Fire Hazards in Valve-Integrated Pressure Regulators for Medical Oxygen
Chiffoleau G., Forsyth B., Forsyth E., Newton B.
Sealed Aluminum Cavity Reactions When Submerged in Pure O2 Reboiler Sump
Cawthra M., Houghton P., McDonald R., Schmidt W., Sherwood R., Wieder S.
Vacuum Superinsulated Liquid Oxygen Piping and Vessels
Barthélémy H., Colson A., Werlen E.
Adiabatic Compression Testing—Part I: Historical Development and Evaluation of Fluid Dynamic Processes Including Shock-Wave Considerations
Newton B., Steinberg T.
Adiabatic Compression Testing—Part II: Background and Approach to Estimating Severity of Test Methodology
Binder C., Chiffoleau G., Newton B., Steinberg T.
Tribocharging of Particle Contaminants Evaluated as an Ignition Source in Oxygen-Enriched Environments
Chowdhury K., Ghosh S., Oza A.
An Approach to Understanding Flow Friction Ignition: A Computational Fluid Dynamics (CFD) Study on Temperature Development of High-Pressure Oxygen Flow Inside Micron-Scale Seal Cracks
Chiffoleau G., Hooser J., Newton B., Wei M.
The Rate-Limiting Mechanism for the Heterogeneous Burning of Cylindrical Iron Rods
Steinberg T., Ward N.
Chlorine Trifluoride Exposure Testing and Oxidizer Reactivity Results
VanOmmeren J.
Author Index
Subject Index
Committee: G04
Paper ID: STP1522-EB
DOI: 10.1520/STP1522-EB
ISBN-EB: 978-0-8031-8407-7
 ASTM International is a member of CrossRef.
978-0-8031-7508-2
STP1522-EB
|
