Durability of Building and Construction Sealants and Adhesives

    Wolf A
    Published: 2004

      Format Pages Price  
    PDF (9.5M) $85   ADD TO CART
    Hardcopy (shipping and handling) $85   ADD TO CART
    Hardcopy + PDF Bundle - Save 25%
    (shipping and handling)
    $127.50   ADD TO CART

    Twenty-eight peer-reviewed papers, reflecting the latest information on sealant and adhesive durability, cover:

    Field Experience with Sealed Joints and Adhesive Fixations—discusses a novel secondary drainage system for architectural panel walls, consisting of tubes and joint protection collection reservoirs with one-way valves; the retrofitting of a lock strip gasket system on the fa├žade of a twenty-year old building to create a watertight barrier; and structural silicone glazing systems.

    Factors Influencing the Durability of Sealed Joints and Adhesive Fixations—examines the influence of polyester powder coating chemistry on the adhesion durability of silicone sealants; water absorption in cold liquid-applied waterproofing; cleaning and preparation of float glass substrates; relationship between elevated moisture conditions in substrates and the ability of sealants to maintain adequate bond strength; and a comparison of the properties of silyl-terminated polyurethanes with those of traditional polyurethanes.

    Durability Studies of Sealants and Adhesives—studies the effect of different foam backer rods on the cure and mechanical performance of sealed joints; HVAC sealant longevity; use of biocides in silicone sealants; case histories of horizontal sealant joint failure investigations; resistance of horizontal joints to concentrated loads; and much more.

    Development of New Test Methods and Performance Based Specifications—reviews issues related to the mechanical property characterization of sealants; a systematic approach to a performance-based guide for the selection of crack sealants used in airport pavements; the effect of ambient laboratory climate ageing on material properties used in the FEA modeling of silicone sealants; and the key requirements relevant to any service-life-prediction methodology.

    Table of Contents

    Secondary Drainage System for Architectural Panel Systems
    Carbary L., Ryan M.

    Lock-Strip Gasket System Retrofit: A Case History
    Schmidt M.

    Durability by Design: Load Carrying Silicone Bonding, Herz Jesu Church, Munich
    Hagl A.

    Structural Glazing Failure — Five Case Studies
    Baker M.

    Quality Control Guidelines for Factory Applied Structural Silicone Glazing
    Carbary L., Gustafson J.

    Historical Development and Future Prospects of Structural Silicone Sealants in China
    Hong-min W., Li-min W., Yue-lin W.

    Influence of Polyester Powder Coating Chemistry on Adhesion Durability of Silicone Sealants
    de Buyl F.

    Water Absorption in Cold Liquid-Applied Waterproofing
    Kovach J., Strong J.

    Effects on Silicone Sealant Adhesion Buildup on Float Glass Substrates
    Chen S., Ma J., Wang S., Zhou W.

    Moisture Conditions of Substrates and Effect on Adhesive Bond of Sealants
    Kenney M., Kenney R.

    Silyl-Terminated Polyurethanes for Construction Sealants
    Kingston T., O'Connor A.

    Estimation of the Fatigue Resistance of Sealants to Movement at Intersections of Sealed Joints and Improvements in the Joint Design Method
    Miyauchi H., Tanaka K.

    Effect of Foam Backer Rod on the Deep Section Cure of One-Part Sealants
    Hutchinson A., Iglauer S., Lee T.

    Effect of Foam Backer Rod on the Mechanical Performance of Sealed Joints
    Hutchinson A., Iglauer S., Lee T.

    Artificial Weathering and Cyclic Movement Test Results Based on the RILEM TC139-DBS Durability Test Method for Construction Sealants
    Enomoto N., Miyauchi H., Sugiyama S., Tanaka K.

    Sealant Longevity for Residential Ducts
    Sherman M., Walker I.

    Insights into the Use of Biocides in Silicones Sealants: Test Methods and Durability Aspects
    de Buyl F., Gastaldi H.

    Effect of Float Glass Surface Composition on Silicone Sealant Adhesion Tested After Simultaneous Exposure to Hot Water and Ultraviolet Light
    Lieb K., McMillan C., Stiell W., Wolf A.

    Comparison of Butyl versus Modified Asphalt Window Flashing Adhesives
    Hagood R., Katsaros J., Weston T., Zima A.

    Durability of Horizontal Sealant Joints
    Gorman P., Nicastro D.

    Durability and Adhesion Rate of One-Part Silicone Sealants to Silicone Rubber Extrusions for New and Remedial Glazing and Weatherproofing Applications
    Carbary L., Zimmer E.

    Sealant Failure Morphology — The Important Criterion of Equipment Selection for Weathering Studies
    Kuberski S., Lee F., Wypych G.

    Issues Related to the Mechanical Property Characterization of Sealants
    Hunston D., White C.

    Nondestructive Field Testing of Installed Weatherproofing Sealant Joints
    Huff D.

    Developing a Performance-Based Joint Sealant Specification for Airport PCC Pavements
    Lacasse M., Masson J.

    Harmonization and Optimization of Weathering Test Methods for Building and Construction Sealants and Adhesives
    Searle N.

    Material Properties for Use in FEA Modeling: Sealant Behavior with Ambient Laboratory Climate Aging
    Cleland-Host H., Wolf A.

    Concepts for Development of a Service Life Prediction Methodology for Sealed Building and Construction Joints—Review and Roadmap for Future Research
    Wolf A.

    Author Index

    Subject Index

    Committee: C24

    DOI: 10.1520/STP1453-EB

    ISBN-EB: 978-0-8031-5498-8

    ISBN-13: 978-0-8031-3480-5

    ASTM International is a member of CrossRef.