|
|
|
Digital Library / STP / STP1285-EB
 |
Composite Materials: Fatigue and Fracture (Sixth Volume)
Armanios EA
Pages: 564
Published: 1997
|
Download this E-Book for $142 PDF (15M)
View License Agreement
Hard Copy version
Overview PDF
Description
Table of Contents
Overview
Armanios EA
Damage Tolerance of Pressurized Graphite/Epoxy Cylinders Under Uniaxial and Biaxial Loading
Lagace PA, Priest SM
Failure of a Titanium Metal-Matrix Composite Cylindrical Shell Under Internal Pressure
Hooke DA, Armanios EA, Dancila DS, Thakker A, Doorbar P
Experimental Design Methods for Assessment of Composite Damage in Recreational Structures
Saczalski T, Lucht B, Saczalski K
Progressive Fracture in Composite Structures
Chamis CC, Murthy PLN, Minnetyan L
Determination of Transverse Shear Strength Through Torsion Testing
Marcucelli KT, Fish JC
Effects of Fiber Bridging and Fiber Fracture on Fatigue Cracking in a Titanium-Matrix Composite
Herrmann DJ, Hillberry BM
Stress-Ratio Effect on Mode II Propagation of Interlaminar Fatigue Cracks in Graphite/Epoxy Composites
Tanaka K, Tanaka H
The Fatigue Growth of Internal Delaminations Under Compressive Loading of Cross-Ply Composite Plates
Pelegri AA, Kardomateas GA, Malik BU
Prediction of Delamination Growth Under Cyclic Loading
Krüger R, König M
A Strength-Based Wearout Model for Predicting the Life of Composite Structures
Schaff JR, Davidson BD
On the Determination of Tensile and Compressive Strengths of Unidirectional Fiber Composites
Chatterjee SN, Yen C-F, Oplinger DW
The Influence of Transverse Bearing Loads Upon the Bypass Strength of Composite Bolted Joints
Sawicki A, Nguyen N
Residual Strength of Metal-Matrix Laminated Panels
Wu M, Wilson D
Impact Damage Resistance and Residual Property Assessment of [0/±45/90]SCS-6/TIMETAL 21S
Miller JL, Portanova MA, Johnson WS
The Relationship Between Critical Strain Energy Release Rate and Fracture Mode in Multidirectional Carbon-Fiber/Epoxy Laminates
Trakas K, Kortschot MT
Experimental Compliance Calibration for the Mixed-Mode Bending (MMB) Specimen
Martin RH, Hansen PL
Separation of Crack Extension Modes in Composite Delamination Problems
Beuth JL, Narayan SH
Fracture Analysis of Internally Delaminated Unsymmetric Laminated Composite Plates
Palmer DW, Armanios EA, Hooke DA
Modeling Crack Extension in Chopped-Fiber Composites
Friis EA, Hahn DL, Cooke FW, Hooper SJ
Hygrothermal Influence on the Free-Edge Delamination of Composites Under Compressive Loading
Crasto AS, Kim RY
Environmental Effects on the Isothermal and Thermomechanical Fatigue of SCS-6/TIMETAL 21S Unidirectional Composites
Rosenberger AH, Nicholas T
Analysis of the Hygrothermal Effects and Parametric Study of the Edge Crack Torsion (ECT) Mode III Test Layups
Li J, O'Brien TK
Influence of Environmental and Geometric Parameters on the Behavior of Fastener Joints in Advanced Composites
Parida BK, Prakash RV, Mangalgiri PD, Vijayaraju K
Creep Elongation of Bolt Holes Subjected to Bearing Loads in a Polymer Matrix Composite Laminate
Kallmeyer AR, Stephens RI
Failure Mechanisms of Woven Carbon and Glass Composites
Alif N, Carlsson LA
Evaluation of Damage Evolution and Material Behavior in a Sigma/Ti-6242 Composite Using Nondestructive Methods
Benson D, Karpur P, Stubbs DA, Matikas TE
Static and Fatigue Interlaminar Tensile Characterization of Laminated Composites
Koudela KL, Strait LH, Caiazzo AA, Gipple KL
The Compact Tension, C(T), Specimen in Laminated Composite Testing
Minnetyan L, Chamis CC
Design and Testing of Z-Shaped Stringer-Stiffened Compression PanelsEvaluation of ARALL, GLARE, and 2090 Materials
Wu M, Reddy SV, Wilson D
Author Index
Subject Index
Committee: D30
Paper ID: STP1285-EB
DOI: 10.1520/STP1285-EB
 ASTM International is a member of CrossRef.
0-8031-2411-2
978-0-8031-2411-0
STP1285-EB
|