|
|
|
SEDL / STP / STP1274-EB
 |
STP1274
Composite Materials: Testing and Design: Twelfth Volume
Deo RB, Saff CR
Pages: 415
Published: 1996
Other books in this series
|
|
Features the most current test and analysis methods applied to composite materials and structures, as well as this decade's latest technological developments in composites. 21 papers from the world's leading experts in the field focus on the following categories: • Environmental Effects Testing, •Design Allowables and Damage Tolerance Testing, • Textile and other Advanced Composites, • and Design, Analysis and Test Techniques.
Table of Contents
Introduction
Deo R., Saff C.
Summary
Effects of Physical Aging at Elevated Temperatures on the Viscoelastic Creep of IM7/K3B
Feldman M., Gates T.
Characterization of Heat Damage in Graphite/Epoxy Composites
Armstrong-Carroll E., Cochran R., Mehrkam P.
Environmental Stress Cracking and Solvent Effects in High-Performance Polymeric Composites
Clifton A., Dillard D., Heithoff C., Kander R., Parvatareddy H.
Influence of Fiber-matrix Interphase on the Long-term Behavior of Graphite/ Epoxy Composites
Elmore J., Reifsnider K., Stinchcomb W., Subramanian S.
Damage Mechanics on Hydrothermal-Aged Fiber-Reinforced Plastics (FRP)
Hamada H., Maekawa Z., Morii T., Tanimoto T., Yokoyama A.
Analysis of Test Methods for Characterizing Skin/Stringer Debonding Failures in Reinforced Composite Panels
Minguet P., O'Brien T.
Mechanical Performance of Composite Sandwich Beams with Syntactic Foam Cores
Hiel C., Ishai O., Jize N.
Characterization of Localized Failure Modes in Honeycomb Sandwich Panels Using Indentation
Lee S., Tsotsis T.
Analysis of Mode III Delamination Fracture Testing Using a Midplane Edge Crack Torsion Specimen
Li J., Wang Y.
Comparison of Static and Impact Energy Absorption of Carbon Fiber/PEEK Composite Tubes
Hamada H., Ramakrishna S.
Effect of Preform Architecture on Modulus and Strength of Two-Dimensional, Triaxially Braided, Textile Composite Materials
Masters J., Minguet P.
Through-the-Thickness Tensile Strength of Textile Composites
Ifju P., Jackson W.
Analysis of Woven and Braided Fabric-Reinforced Composites
Naik R.
In-Phase Thermomechanical Fatigue of Metal Matrix Composites: Deformation Response and Progressive Damage Mechanisms
Majumdar B., Newaz G.
Constitutive Response and Deformation Mechanisms in Unidirectional Metal Matrix Composites Under Compression
Newaz G.
Micromechanical Characterization of Nonlinear Behavior of Advanced Polymer Matrix Composites
Chen J., Gates T., Sun C.
Analysis of the Short-Beam Shear Test for Unidirectional Composites
Chatterjee S.
Design and Evaluation of Three Methods for Testing Extension-Twist-Coupled Laminates
Armanios E., Hooke D.
Design Allowables from Regression Models Using Data from Several Batches
Vangel M.
Using a Mixed-Mode Fatigue Delamination Criterion
Hooper S., Martin R., Sriram P.
Effect of Stacking Sequence on Delamination Toughness and Delamination Growth Behavior in Composite End-Notched Flexure Specimens
Altonen C., Davidson B., Polaha J.
Author Index
Subject Index
Committee: D30
Paper ID: STP1274-EB
DOI: 10.1520/STP1274-EB
ISBN-EB: 978-0-8031-5331-8
 ASTM International is a member of CrossRef.
0-8031-2404-X
978-0-8031-2404-2
STP1274-EB
|
