STP1230

    Composite Materials: Fatigue and Fracture: Fifth Volume

    Martin RH
    Published: 1995


      Format Pages Price  
    PDF (11M) $139   ADD TO CART
    Hardcopy (shipping and handling) $139   ADD TO CART
    Hardcopy + PDF Bundle - Save 25%
    (shipping and handling)
    $208.50   ADD TO CART


    Features the latest information on methods for predicting how composite materials and composite material structures fail. 27 peer-reviewed papers from the world's leading professionals in the field. Five key areas:

    Delamination Characterization -- Eight papers explore the challenges of characterizing delamination fracture of laminated composite materials in terms of interlaminar fracture toughness.

    Damage Modeling -- Developing appropriate models for predicting composite damage such as matrix cracking, fiber failure and delamination are considered in five papers.

    Material Damage Characterization -- Five papers investigate how environmental exposure and mechanical loads damage composite materials.

    Impact -- Methods to predict the effect of impact on laminated composite materials are explained in four papers.

    Structural Damage Characterization -- Five papers describe failure or damage issues in specific structures.


    Table of Contents

    Experimental Development of a Mixed-Mode Fatigue Delamination Criterion
    Hooper S., Khourchid Y., Martin R., Sriram P.

    Mode I and Mode II Delamination Growth of Interlayer Toughened Carbon/Epoxy (T800H/3900-2) Composite System
    Hojo M., Kabashima S., Kageyama K., Kimpara I., Ohsawa I.

    Interlaminar Fracture Toughness of Glass Fiber Laminates Additionally Reinforced with Carbon Bead
    Lee J., Ogin S., Smith P.

    Delamination of Carbon/Epoxy Laminates Under Cyclic Mode II Loading
    Alberti M., Eisele U., Kussmaul K., Schneider T.

    Mode III Delamination Using a Split Cantilever Beam
    Kortschot M., Martin R., Sharif F.

    Mixed Mode Interlaminar Fracture Toughness of Unidirectional Glass/Epoxy Composite
    Benzeggagh M., Gong X.

    Improvement of Delamination Resistance with Carbon Nonwoven Mat Interleaves
    Armstrong-Carroll E., Cochran R.

    Mode I and Mode II Fracture Toughness Measured Between Differently Oriented Plies in Graphite/Epoxy Composites
    Chou I., Kageyama K., Kimpara I., Ohsawa I.

    Prediction of Energy Release Rate for Edge Delamination Using a Crack Tip Element Approach
    Davidson B.

    Stress and Energy Based Fracture Conditions for Fiber-Wise Splitting in Composites
    Suresh N., Wang A.

    Modeling of Accumulated Damage and Failure of Multidirectional Composite Plates Subjected to In-Plane Loads
    Chang F., Shahid I.

    Shear Deformation Analysis of the Energy Release Rate of Transverse Cracking in Laminated Composites
    Armanios E., Sriram P.

    A Random-Damage Finite Element for Modeling Failure in Advanced Composite Materials
    Slattery K.

    Stacking Sequence Effects and Delamination Growth in Graphite/Epoxy Laminates Under Compression-Dominated Fatigue Loading
    Komorowski J., Lefebvre D., Randon C., Roy C.

    The Effect of Graphite Fiber Properties on Microcracking Due to Thermal Cycling of Epoxy-Cyanate Matrix Laminates
    Jayaraman N., Knouff B., Tompkins S.

    Marine Environmental Effects on Polymer Matrix Composites
    Carlsson L., Gillespie J., Pomiès F.

    Observations of the Load Redistribution in Polymeric Composite Laminates Under Tension-Tension Fatigue Loading
    Connolly M., Davidson D.

    A New Test for Compression Testing of Impregnated Tows
    Cairns D.

    Non-Penetrating Impact Behavior of CFRP at Low and Intermediate Velocities
    Coxon B., Delfosse D., Dost E., Poursartip A.

    Post-Impact Fatigue Response of Stitched Composites
    Kennedy J., Moon D.

    Impact and Fatigue Resistance of a [±30°/0°] 3-D Braided Carbon Epoxy Composite
    Deaton J., Portanova M.

    Influence of Impact Parameters on the Response of Laminated Composite Plates
    Ambur D., Prasad C., Starnes J.

    Damage Tolerance and Arrest Characteristics of Pressurized Graphite/Epoxy Tape Cylinders
    Graves M., Lagace P., Ranniger C.

    Fatigue and Fracture of the 767 Graphite Torsion Spring
    Bliss R., Maguire R., Wheeler D.

    Fracture of Glass-Epoxy Laminates Under Torsion and Combined Tension-Torsion Loads
    Fish J., Sen J.

    Influence of Realistic Ply-Drop Geometries on Interlaminar Stresses in Tapered Laminates
    Vizzini A.

    Delamination in Composites with Terminating Internal Plies Under Tension Fatigue Loading
    Cui W., Jones M., Wisnom M.

    Author Index

    Subject Index


    Committee: D30

    Paper ID: STP1230-EB

    DOI: 10.1520/STP1230-EB

    ISBN-EB: 978-0-8031-5297-7

    ISBN-13: 978-0-8031-2012-9

    ASTM International is a member of CrossRef.

    0-8031-2012-5
    978-0-8031-2012-9
    STP1230-EB