|
|
|
SEDL / STP / STP1206-EB
 |
STP1206
Eleventh Volume: Composite Materials—Testing and Design
Camponeschi ET
Pages: 356
Published: 1993
Other books in this series
|
|
STP 1206 contains information on the testing, analysis, and design of composite materials. 22 papers in sections on: • Materials Testing and Response; • Design and Analysis; • Interlaminar Fracture and Strength. The largest portion of the papers deals with testing and analysis of composites at the coupon level or below, with a few papers dealing with design issues or analyses used specifically for a design.
Table of Contents
Overview
Camponeschi E.
Matrix-Dominated Mechanical Properties of a Fiber Composite Lamina
DeTeresa S., Lyon R., Schumann D.
Scale Effects on the Transverse Tensile Strength of Graphite/Epoxy Composites
O'Brien T., Salpekar S.
Inelastic Shear Response of Unidirectional Composites from Torsion of Solid Bars
Adams D., Chatterjee S., Kessler J., Yen C.
Composite Material Shear Property Measurement Using the Iosipescu Specimen
Budiman H., Farley G., Ho H., Morton J., Tsai M.
Compression of “Thick” Composites: Two Test Methods
Goeke E.
Evaluation of Compression Specimens and Fixtures for Testing Unidirectional Composite Laminates
Daniels J., Sandhu R.
Measurement of Multiaxial Ply Strength by an Off-Axis Flexure Test
Crews J., Naik R.
Biaxial Testing and Failure Mechanisms in Tubular G-10 Composite Laminates
Socie D., Wang J.
Elastic Constants of Isotropic and Orthotropic Composite Materials from Plate Vibration Test Data
Ayorinde E., Gibson R., Wen Y.
High Strain Rate Effects for Composite Materials
Brown A., Groves S., Lyon R., Sanchez R.
Matrix-Dominated Stress/Strain Behavior in Polymeric Composites: Effects of Hold Time, Nonlinearity, and Rate Dependency
Gates T.
Thermomechanical Fatigue Behavior of SiC/Ti-24Al-11Nb [0]8 in Air and Argon Environments
Bartolotta P., Verrilli M.
Micromechanical Analysis of Fiber-Matrix Interface Stresses Under Thermomechanical Loadings
Crews J., Naik R.
Bearing Strength Behavior of Clearance-Fit Fastener Holes in Toughened Graphite/Epoxy Laminates
DiNicola A., Fantle S.
Experimental Determination of the Effect of Hole Interaction on Stress Concentrations in Angle Ply Graphite/Epoxy Composite Panels
Glaessgen E., Sorem J., Tipton S.
Design and Testing of Composite Laminates for Optimum Extension-Twist Coupling
Armanios E., Hooke D., Kamat M., Li J., Palmer D.
Modeling of the Thermo-Elastic Properties of Woven Fabric Composites in Complex Shapes
Laroche D., Vu-Khanh T.
Analysis of Thick-Sectioned Composite Cylindrical Shells Under Hydrostatic Pressure
Yuan F.
The Effect of Mixed-Mode Loading on Delamination Fracture Toughness
Hooper S., Khourchid Y., Sriram P.
A Bilinear Failure Criterion for Mixed-Mode Delamination
Reeder J.
Determination of Ply-Drop Configurations
Fish J., Vizzini A.
An Interlaminar Tensile Strength Specimen
Jackson W., Martin R.
Author Index
Subject Index
Committee: D30
Paper ID: STP1206-EB
DOI: 10.1520/STP1206-EB
ISBN-EB: 978-0-8031-5252-6
 ASTM International is a member of CrossRef.
0-8031-1879-1
978-0-8031-1879-9
STP1206-EB
|
