|
|
|
SEDL / STP / STP1136-EB
 |
STP1136
Materials Characterization by Thermomechanical Analysis
Riga AT, Neag MC
Pages: 195
Published: 1991
|
|
Examines the uses of thermomechanical analysis (TMA) and thermodilatometry in materials science. Includes 15 papers on instrumentation, techniques, and applications of TMA in characterizing inorganic and polymeric materials.
Table of Contents
Thermomechanical Analysis in Materials Science
Neag C.
Temperature Calibration of Thermomechanical Analyzers: Part II—An Interlaboratory Test of the Calibration Procedure
Seyler R., Earnest C.
Evaluating the Accuracy of Thermomechanical Analysis Expansion Coefficient Measurements in a Wide Temperature Range
Matsumori N., Penn J., Nakamura N., Teramoto Y.
A New Thermodilatometric Instrument for Thin Metallic Ribbons
Etchessahar E., Harmelin M., Debuigne J.
Material Characterization by Thermomechanical Analysis: Industrial Applications
Riga A., Collins E.
Elasticity Characterization of Materials During Thermal Treatment by Thermal Mechanical Analysis
Wiedemann H., Riesen R., Boller A.
The Use of Thermomechanical Analysis as a Viable Alternative for the Determination of the Tensile Heat Distortion Temperature of Polymer Films
Moscato M.
Glass Transition Determination by Thermomechanical Analysis, a Dynamic Mechanical Analyzer, and a Differential Scanning Calorimeter
Cassel B., Twombly B.
Thermomechanical Analysis: Advances in the State of the Art
Sauerbrunn S., Gill P.
Characterization of Polymer Electrolytes by Simultaneous Thermomechanical Analysis and Dielectric Thermal Analysis Techniques
McGhie A., Jones G., Farrington G., Paul E.
Application of Thermal Mechanical Analysis to Organic Coatings
Schoff C., Kamarchik P.
Compositional Effects of Fiber Reinforced Composites on the Coefficient of Thermal Expansion
Adams R.
In-Plane and Out-of-Plane Coefficient of Thermal Expansion Characterization of New High-Performance Printed Circuit Boards Using Dilatometer and Thermomechanical Analysis
Ibrahim A., Klemens M., Cozzo T.
The Use of Thermal Mechanical Analysis to Characterize Ethylene-Propylene-Diene Terpolymer (EPDM) Roofing Membrane Materials
Gaddy G., Rossiter W., Eby R.
Asphalt Cement Characterization by Thermomechanical Analysis
Lee D., Enustun B., Kim S.
Author Index
Subject Index
Committee: E37
Paper ID: STP1136-EB
DOI: 10.1520/STP1136-EB
ISBN-EB: 978-0-8031-5178-9
 ASTM International is a member of CrossRef.
0-8031-1434-6
978-0-8031-1434-0
STP1136-EB
STP 1136
|
