|
|
|
SEDL / STP / STP1133-EB
 |
STP1133
Performance of Protective Clothing: Fourth Volume
McBriarty JP, Henry NW
Pages: 1030
Published: 1992
Other books in this series
|
|
80 peer-reviewed papers address these issues: • Hazards and Methods (including aerosols, physical resistance, biological, chemical, pesticides, and thermal and heat) • Field tests, New tests, Evaluations, Design, Physiological, Performance (including field tests, new and improved tests, evaluations, physiological, ergonomical, design, evaluation, and performance, decontamination) • Programsand Assessments (including program, selection, assessments, business) • International standards
Table of Contents
Model of Aerosol Protection Offered by Permeable Protective Garments
Fedele P.
Measurement and Control Method for Cutting Resistance of Protective Gloves
Payot F.
Development of a Method to Evaluate the Puncture Resistance of Protective Clothing Materials
CÔté S., Lara J., Nelisse H., Nelisse N.
Ability of 1000 mL Water Leak Test for Medical Gloves to Detect Gloves with Potential for Virus Penetration
Cyr W., Gantz N., Kotilainen H., Lytle C., Routson L., Truscott W.
Dry Test Method for Rating the Penetration of Viruses Through Porous Materials Used in Protective Clothing by Health Care Workers
Peeler J., Placencia A.
The Resistance of Clothing Materials to Biological Liquids
Henry N., Montefiori D.
Protective Clothing for Health Care Workers: Liquidproofness Versus Microbiological Resistance
Brown P.
A Comparison of Methods for Measuring the Liquid Barrier Properties of Surgical Gowns
McCullough E., Schoenberger L.
An Interlaboratory Comparison of Standard Test Methods for Medical Gloves
Wong R., Douglas A., Neufeld P.
Chemical Resistance Properties of Advanced Glove Materials
Hassler K., Wilusz E.
A Comparison of the Liquid Penetration Test with Other Chemical Resistance Tests and its Application in Determining the Performance of Protective Clothing
Greimel T., Stull J., White D.
Assessment of the Resistance of Protective Gloves to Chemicals
Barat F., Mahieu J.
Testing the Resistance of Protective Clothing Materials to Nitroglycerin and Ethylene Glycol Dinitrate
Drolet D., Lara J.
Pesticide Resistance and Thermal Comfort Tests of Protective Clothing in Agriculture
Hinz T., Jahns G.
Methyl Parathion Residues in Protective Apparel Fabric: Effect of Residual Soils on Decontamination
Laughlin J.
Analysis of 2,4-D Glove Permeation under Controlled Environmental Conditions
Moody R.
Resistance of Glove Materials to Permeation by Agricultural Pesticides
Ehntholt D., Frank U., Goydan R., Nielsen A., Schwope A.
Pesticide Protection Through Layered Clothing Systems
Crossmore D., Obendorf S.
Evaluating the TPP of Clothing Exposed to Electric Arcs: A Standard Laboratory Test Apparatus
Chen R., Dirks E., King M., Menzies R., Soroka A., Sun Y.
Method for Assessing the Insulation Properties of Gloves Against Contact Heat
Paureau J., Rollin M.
Protective Clothing Development at New Zealand Aluminium Smelters Ltd
Coughlan J.
Thermo-Man® and Thermo-Leg: Large Scale Test Methods for Evaluating Thermal Protective Performance
Barker R., Behnke W., Geshury A.
Sweat Accumulation in Clothing in the Cold
Nielsen R.
A Field Study of the Clothing Used at Cold Work Places
Olesen B.
Field Test Evaluation of ASTM Standard F-1154 with Chemical Protective Suit Ensembles
Storment S., Veghte J.
New Comprehensive Performance Standards for Chemical Protective Gloves, Boots, and Other Types of Protective Clothing
Stull J.
A Preliminary Study of an Intermittent Collection Procedure as an Alternative Permeation Method for Non-Volatile, Water Soluble Chemicals
Dodgen C., Morley M., Pinette M., Stull J.
Glove System for Cold/Wet Environments
Herman D., Sawicki J., Schwope A., Wells L.
A Comparative Study of Permeation Tests: Gravimetric Method vs ASTM Method F-739
de Merchant J., Ketelson H., Lara J.
An Evaluation of a Permeation Field Test Kit to Aid Selection of Chemical Protective Clothing
Storment S., Stull J., Veghte J.
Application of Three ASTM Test Methods to Measure Thermal Resistance of Clothing
Bomberg M.
The Effect of Seams and Closures on Pesticide Penetration Through Fabric
DeJonge J., Dimit C., Easter E.
Evaluating the Performance of Exhaust Valves for Vapor-Protective and Chemical Protective Dive Suits
Greimel T., Stull J., White D.
Development and Evaluation of Experimental Nonwoven Breathable Barrier Fabrics
Salamie L., Wadsworth L.
A Protocol to Measure Physical Performance Degradation During Extended Wear of Protective Clothing
Dix J., Rhodes W., Weihrer S.
The Evaluation of Protective Clothing as Chemical Barriers for Mixers/Loaders and Applicators in Agricultural Field Tests Designed to Meet FIFRA GLP Testing Standards
Dodd R., Oakland B., Ross R., Schabacker D.
The Introduction of Fire Resistant Workwear Programs in Alberta
Clark P., Smith G.
Comparative Responses to Exercise-Heat Stress of Two Chemical Protective Garments
Cadarette B., Gonzalez R., Santee W., Schamber D.
The Effectiveness of Decontamination Procedures Used by Asbestos Abatement Workers
Jose D., Salzenberg C.
Evaluation of Carbonaceous Adsorbent Coated Fabric as a Barrier to Pesticide Penetration for Dermal Exposure Reduction in Pesticide Application
Easter E., Koals M.
Physiological Responses While Wearing Protective Footwear in a Cold-Wet Environment
Blanchard L., DiRaimo D., Endrusick T., Gonzalez R., Santee W.
Physiological and Biophysical Properties of a Semipermeable Attached Hood to a Chemical Protective Garment
Endrusick T., Gonzalez R., Santee W.
Heat Strain Produced by 3 Aircrew Chemical Defence Ensembles Under Hot Conditions: Improvement with an Air-Cooling Vest
Michas R., Schmegner I., Vallerand A.
Thermal Constraints Related to the Wearing of Protective Clothing. Body Ventilation by Fresh Air
Bittel J., Frossard H., Hanniquet A.
Clothing Insulation Prediction in Hypobaric Environments
Chang S., Gonzalez R.
The Function of Semipermeable Membrane in Cold
Anttonen H., Hiltunen E., Virtanen J.
Assessment of Ventilation of Firefighter Protective Clothing
Bernard T., Buller K., Dukes-Dobos F., Reischl U., Thomas N.
Anthropometric Analysis of Fit Problems in Chemical Protective Gloves
Crown E., Rigakis K., Tremblay J.
Some Ergonomics Issues in the Design of Personal Protective Devices
Abeysekera J.
Movement Analysis as the Basis for the Development and Evaluation of a Protective Coverall Design for Asbestos Abatement
Ashdown S., Watkins S.
An Evaluation of Fit of Protective Coveralls Manufactured to a Proposed Revision of ANSI/ISEA 101
Keeble V., Mellian S., Prevatt M.
Effect of Fabric Finish on the Adhesion of Molten Metal to Wool
Proctor T., Thompson H.
New Developments in the Design and Evaluation of Flame Retardant Clothing for Protection Against Molten Aluminum Splash Hazards
Sharkey R.
Energy as Performance Criterion for Chain Saw Protective Clothing
Arteau J., Turcot D.
Instrumented Mannequin Evaluation of Thermal Protective Clothing
Ackerman M., Crown E., Dale J., Leung E., Rigakis K.
Robotic Mannequin Technology for Enhanced Product Testing
Bennett D., Fecht B.
Evaluating Textiles and Apparel for Controlling Contamination in Cleanrooms
Bullerwell A., Hersh S., Mehta S., Tucker P.
The Effect of Wear and Laundering on Flame-Retardant Fabrics
Mäkinen H.
Wash Durability of FR Cotton
Baitinger W.
The Durability of Flame Resistant Fabrics in an Industrial Laundry Environment
Loftin D.
A Technique to Determine Chemical Contamination in Chemical Protective Clothing
Carroll T., McCarthys R., Schwope A.
The Use of Bleach Pre-Treatments in Chlorpyrifos Residue Removal from Cotton Workwear
Crown E., Perkins H., Rigakis K.
The Efficiency of Cold Water Machine Washing in Removing Glyphosate from Work Garments
Guillot J., Samuel O.
Statistical Fit Models of Methyl Parathion Decontamination from Applicator Clothing
Laughlin J.
Residue Removal of Granular Formulation Atrazine and its Dust from Workers' Protective Clothing by Laundering
Kim C., Wang Q.
Repellent Treatments on Stretchable and/or Inherently Flame Retardant Fabrics
DeLong B., Dix J.
Personal Protective Equipment Decontamination for Hazardous Waste Operations and Emergency Response
Mansdorf S.
Protective Clothing Program Management
Wiernicki C.
Selection and Development of Chemical-Resistant, Flame-Resistant Protective Gloves for U.S. Navy Shipboard Use
Heath C., Stull J., White D.
Selection and Development of Protective Clothing for Fire Fighters -- A Case Study for Users' Assessment of Standards, Tests and Performance Requirements
Rotmann M.
Selection and Use of Molecular Parameters to Predict Permeation Through Fluoropolymer-Based Protective Clothing Material
Bentz A., Billing C., Hansen C.
Developing and Selecting Test Methods for Measuring Protective Clothing Performance in Chemical Flashover Situations
Mann P., Storment S., Stull J., Veghte J.
Assessment of the Potential for Reducing Occupational Injury through Protective Clothing
Burridge J., Laing R., Wilson C.
Protective Clothing Use in the Lawn Care Industry
Lefton J., Nelson C., Scott D.
A Suggested Strategy to Increase Employee Use of Protective Clothing
Burns D., Nelson C.
A Computer System to Predict Chemical Permeation Through Fluoropolymer-Based Protective Clothing
Bentz A., Billing C., Goydan R., Powell J.
Estimation of the Cost of Using Chemical Protective Clothing
Renard E., Schwope A.
Activities of CEN TC 162 WG2: Clothing for Protection Against Heat and Flame
Cole R.
European Directives and Standards Relating to Personal Protective Equipments
Mayer A.
European Standardization of Protective Clothing
Heffels P., Ziegenfu|engineerchief engineer B.
Protective Clothing Standards Development in China
Gao F., Xu M., Xu S., Zhao Y.
Author Index
Subject Index
Committee: F23
Paper ID: STP1133-EB
DOI: 10.1520/STP1133-EB
ISBN-EB: 978-0-8031-5194-9
 ASTM International is a member of CrossRef.
0-8031-1430-3
978-0-8031-1430-2
STP1133-EB
|
