|
|
|
SEDL / STP / STP1110-EB
38 papers by authors from universities, government, and industry give a balanced presentation on these subjects: • Matrix Cracking and Delamination • Interlaminar Fracture Toughness • Delamination Analysis • Strength and Impact • Fatigue and Fracture. For aircraft designers, researchers in aerospace materials, composite material manufacturers, aerospace professors; also engineering designers, engineering professors.
Table of Contents
Overview
O'Brien T.
Fracture Mechanics Approaches to Transverse Ply Cracking in Composite Laminates
Boniface L., Ogin S., Smith P.
Matrix Cracking in Composite Laminates with Resin-Rich Interlaminar Layers
Ilcewicz L., Dost E., McCool J., Grande D.
The Upper Bounds of Reduced Axial and Shear Moduli in Cross-Ply Laminates with Matrix Cracks
Lee J., Allen D., Harris C.
Cooling Rate Effects in Carbon Fiber/PEEK Composites
Davies P., Cantwell W., Jar P., Richard H., Neville D., Kausch H.
Effects of Moisture Absorption on Edge Delamination, Part I: Analysis of the Effects of Nonuniform Moisture Distributions on Strain Energy Release Rate
Hooper S., Toubia R., Subramanian R.
Effects of Moisture Absorption on Edge Delamination, Part II: An Experimental Study of Jet Fuel Absorption on Graphite-Epoxy
Hooper S., Subramanian R., Toubia R.
Effect of Porosity on Flange-Web Corner Strength
Kan H., Bhatia N., Mahler M.
Mixed-Mode Fracture in Fiber-Polymer Composite Laminates
Hashemi S., Kinloch A., Williams G.
Effects of T-Tabs and Large Deflections in Double Cantilever Beam Specimen Tests
Naik R., Crews J., Shivakumar K.
Experimental Determination of the Mode I Behavior of a Delamination Under Mixed-Mode Loading
Poursartip A., Chinatambi N.
Stabilized End Notched Flexure Test: Characterization of Mode II Interlaminar Crack Growth
Kageyama K., Kikuchi M., Yanagisawa N.
Initiation and Growth of Mode II Delamination in Toughened Composites
Russell A.
Evaluation of the Split Cantilever Beam for Mode III Delamination Testing
Martin R.
Fracture Analysis of Transverse Crack-Tip and Free-Edge Delamination in Laminated Composites
Armanios E., Sriram P., Badir A.
Combined Effect of Matrix Cracking and Free Edge on Delamination
Salpekar S., O'Brien T.
Fatigue Delamination Onset Prediction in Unidirectional Tapered Laminates
Murri G., Salpekar S., O'Brien T.
Delamination Analysis of Tapered Laminated Composites Under Tensile Loading
Armanios E., Parnas L.
Analysis of Delamination Growth in Compressively Loaded Composite Laminates
Tratt M.
A Study of an Implanted Delamination Within a Cylindrical Composite Panel
Palazotto A., Wilder B.
A Comparison of Experimental Observations and Numerical Predictions for the Initiation of Fiber Microbuckling in Notched Composite Laminates
Guynn E., Bradley W., Ochoa O., Whitcomb J.
Three-Dimensional Stress Analysis of Plain Weave Composites
Whitcomb J.
Compression Testing of Thick-Section Composite Materials
Camponeschi E.
Influence of Low-Velocity Impact on Composite Structures
Madan R.
Effects of Stacking Sequence on Impact Damage Resistance and Residual Strength for Quasi-Isotropic Laminates
Dost E., Ilcewicz L., Avery W., Coxon B.
Relevance of Impacter Shape to Nonvisible Damage and Residual Tensile Strength of a Thick Graphite/Epoxy Laminate
Poe C.
Response of Composite Plates to Quasi-Static Impact Events
Bucinell R., Nuismer R., Koury J.
Compression of Composite Materials: A Review
Camponeschi E.
Fatigue Behavior of Continuous Carbon Fiber-Reinforced PEEK
Curtis D., Davies M., Moore D., Slater B.
Damage-Based Notched Strength Modeling: A Summary
Kortschot M., Beaumont P.
Fatigue Damage Mechanics of Notched Graphite-Epoxy Laminates
Spearing M., Beaumont P., Ashby M.
Hole Effect and Compression Fatigue of T300/N5208 Composite Materials
Lai D., Bathias C.
Effect of Interlaminar Normal Stresses on the Uniaxial Zero-to-Tension Fatigue Behavior of Graphite/Epoxy Tubes
Krempl E., An D.
Effects of Notch Geometry and Moisture on Fracture Strength of Carbon/Epoxy and Carbon/Bismaleimide Laminates
Underwood J., Burch I., Bandyopadhyay S.
Fatigue Failure Processes in Aligned Carbon-Epoxy Laminates
Piggott M., Lam P.
Fracture of Fibrous Metal Matrix Composites Containing Discontinuities
Bahei-El-Din Y.
Fatigue Crack Growth in a Unidirectional SCS-6/Ti-15-3 Composite
Kantzos P., Telesman J., Ghosn L.
Thermomechanical Fatigue of a Quasi-Isotropic Metal Matrix Composite
Majumdar B., Newaz G.
Observations of Fatigue Crack Initiation and Damage Growth in Notched Titanium Matrix Composites
Naik R., Johnson W.
Damage and Performance Characterization of ARALL Laminates Subjected to Tensile Cyclic Loading
Osiroff R., Stinchcomb W., Reifsnider K.
Effective Crack Lengths by Compliance Measurement for ARALL-2 Laminates
Wilson C., Wilson D.
An Investigation of the Effects of Temperature on the Impact Behavior and Residual Tensile Strength of an ARamid Aluminum Laminate (ARALL-2 Laminate)
Lee T., Wilson D.
Author Index
Subject Index
Committee: D30
Paper ID: STP1110-EB
DOI: 10.1520/STP1110-EB
ISBN-EB: 978-0-8031-5169-7
 ASTM International is a member of CrossRef.
0-8031-1419-2
978-0-8031-1419-7
STP1110-EB
STP 1110
|
