|
|
|
SEDL / STP / STP1108-EB
 |
STP1108
Polymer Modified Asphalt Binders
Wardlaw KR, Shuler S
Pages: 368
Published: 1992
|
|
Peer-reviewed papers discus the use of elastomers such as styrene block copolymers, latex rubber, and various plastomers that include EVA and polyethylene. In 2 sections: laboratory studies of polymer modified asphalt binders for it mix asphalt; and emulsions and full scale field experiments which explore construction aspects of polymer modified asphalt pavements.
Table of Contents
Stabilization Mechanisms in Polyolefin-Asphalt Emulsions
Hesp S., Woodhams R.
Rheological Properties of Polymer-Modified Emulsion Residue
Anderson D., Christensen D., Robyak R., Roque R.
The Determination of SBS, EVA and APP Polymers in Modified Bitumens
Choquet F., Ista E.
Influence of Binder Rheology on Rut Resistance of Polymer Modified and Unmodified Hot Mix Asphalt
Bouldin M., Collins J.
An Evaluation of Heavy Duty Binders in the Laboratory
Hasegawa K., Mayama M., Yoshino M.
Influence of the Rheological Properties of Modified Asphalt Binders on the Load Deformation Characteristics of the Binder-Aggregate Mixtures
Goodrich J., Monismith C., Sousa J., Tayebali A.
Design and Construction of Asphalt Concrete Using Polymer Modified Asphalt Binders
Hanson D., McKeen R., Shuler T.
Laboratory and Field Studies of Polyolefin and Latex Modifiers for Asphalt Mixtures
Epps J., Newcomb D., Stroup-Gardiner M.
Polymer Modified Hot Mix Asphalt — Oregon Experience
George A., Rogge D., Terrel R.
Performance of Polymer Modified Asphalt Mixes in Kentucky
Allen D., Fleckenstein L., Mahboub K.
Analysis of the Influence of Low Density Polyethylene Modification (Novophalt) of Asphalt Concrete on Mixture Shear Strength and Creep Deformation Potential
Little D.
Field Trials with Polymer Modified Asphalts in Saudi Arabia
Balghunaim F., Dhalaan M., Dhubaib I., Noureldin A.
The Determination of Bitumen and Recycled Tire Rubber Content on Rubberized Asphalt Road Mixtures
Choquet F., Ista E.
Comparative Performance of Polymer Modified Hot Mix and the Practical Problems of Ensuring Performance
Heather W.
Thermo-Oxidative Degradation of Polymer Modified Bitumen
Johansson U., Linde S.
Viscosity Measurements of Polymer Modified Asphalts
Schwager B.
SBS-Modified Asphalts for Surface Dressing — A Comparison Between Hot-Applied and Emulsified Binders
Joly A., Samanos J., Serfass J.
SBS Polymer Modified Asphalt Binder and its Implications on Overlay Design
Hopman P., Molenaar A., Srivastava A.
Polymer Modified Asphalt Concrete for Environmental Liners
Terrel R.
Characterisation of Polymer Modified Asphalt Binders for Roads and Airfields
Arya I., Bose S., Jain P.
Author Index
Subject Index
Committee: D04
Paper ID: STP1108-EB
DOI: 10.1520/STP1108-EB
ISBN-EB: 978-0-8031-5180-2
 ASTM International is a member of CrossRef.
0-8031-1413-3
978-0-8031-1413-5
STP1108-EB
|
