|
|
|
SEDL / STP / STP1074-EB
 |
STP1074
Fracture Mechanics: Twenty-First Symposium
Gudas JP, Joyce JA, Hackett EM
Pages: 611
Published: 1990
Other books in this series
|
|
Presents work in elastic-plastic fracture, dynamic fracture, transition fracture in steel micro mechanical aspects of the fracture process, computational mechanics, fracture mechanics testing, and applications of the technology.
Table of Contents
An Analytical Comparison of Short Crack and Deep Crack CTOD Fracture Specimens of an A36 Steel
Sorem W., Dodds R., Rolfe S.
Direct J-R Curve Analysis: A Guide to the Methodology
Herrera R., Landes J.
Application of the Method of Caustics to J-Testing with Standard Specimen Geometries
Sanford R., Judy R.
Extrapolation of C(T) Specimen J-R Curves
Wilkowski G., Marschall C., Landow M.
Application of J-Integral and Modified J-Integral to Cases of Large Crack Extension
Joyce J., Davis D., Hackett E., Hays R.
Impact Fracture of a Tough Ductile Steel
Douglas A., Suh M.
Dynamic Fracture Behavior of a Structural Steel
Cho K., Sklenak J., Duffy J.
Dynamic Key-Curves for Brittle Fracture Impact Tests and Establishment of a Transition Time
Böhme W.
Explosive Testing of Full Thickness Precracked Weldments
Gifford L., Carlberg J., Wiggs A., Sickles J.
Magnetic Emission Detection of Crack Initiation
Winkler S.
Effect of Biaxial Loading on A533B in Ductile-Brittle Transition
Garwood S., Davey T., Wong Y.
Fracture Toughness in the Transition Regime for A533B-1 Steel: The Effect of Specimen Sidegrooving
Morland E.
Analysis of Fracture Toughness Data for Modified SA508 Cl2 in the Ductile-to-Brittle Transition Region
Miglin M., Wade C., Van Der Sluys W.
Effects of Warm Pre-Stressing on the Transition Toughness Behavior of an A533 Grade B Class 1 Pressure Vessel Steel
Lidbury D., Birkett P.
Unique Elastic-Plastic R-Curves: Fact or Fiction?
Etemad M., Turner C.
Adhesive Fracture Testing
Mecklenburg M., Arah C., McNamara D., Hand H., Joyce J.
Evaluation of Elastic-Plastic Surface Flaw Behavior and Related Parameters Using Surface Displacement Measurements
Lloyd W., Reuter W.
Effect of Dynamic Strain Aging on Fracture Resistance of Carbon Steels Operating at Light-Water Reactor Temperatures
Marschall C., Landow M., Wilkowski G.
Prediction of Fracture Toughness by Local Fracture Criterion
Miyata T., Otsuka A., Mitsubayashi M., Haze T., Aihara S.
Microscopic Aspects of Ductile Tearing Resistance in AISI Type 303 Stainless Steel
Saxena A., Daly D., Ernst H., Banerji K.
Microstructure and Fracture Toughness of Cast and Forged Ultra-High-Strength, Low-Alloy (UHSLA) Steels
Zeman J., Rolc S., Buchar J., Pokluda J.
Simulation of Crack Growth and Crack Closure under Large Cyclic Plasticity
Kim K., Van Stone R., Laflen J., Orange T.
Comparison of Elastic-Plastic Fracture Mechanics Techniques
Brust F., Nakagaki M., Gilles P.
Treatment of Singularities in a Middle-Crack Tension Specimen
Shivakumar K., Raju I.
Assessment of Influence Function for Elliptical Cracks Subjected to Uniform Tension and to Pure Bending
Oore M.
Finite Element Meshing Criteria for Crack Problems
Gerstle W., Abdalla J.
Application of the CEGB Failure Assessment Procedure, R6, to Surface Flaws
Chell G.
Method and Models for R-Curve Instability Calculations
Orange T.
Closure Measurements via a Generalized Threshold Concept
Marci G., Castro D., Bachmann V.
Use of the Direct-Current Electric Potential Method to Monitor Large Amounts of Crack Growth in Highly Ductile Metals
Marschall C., Held P., Landow M., Mincer P.
Load-Point Compliance for the Arc-Bend/Arc-Support Fracture Toughness Specimen
Baratta F., Kapp J., Saunders D.
Author Index
Subject Index
Committee: E08
Paper ID: STP1074-EB
DOI: 10.1520/STP1074-EB
ISBN-EB: 978-0-8031-5134-5
 ASTM International is a member of CrossRef.
0-8031-1299-8
978-0-8031-1299-5
STP1074-EB
STP 1074
|
