|
|
|
SEDL / STP / STP1044-EB
 |
STP1044
Advances in Thermoplastic Matrix Composite Materials
Newaz GM
Pages: 306
Published: 1989
|
|
Advances in Thermoplastic Matrix Composites Materials Provides an overview of recent accomplishments in advanced aerospace thermoplastic composites. 18 pages cover these important issues: • Processing • Thermal and Mechanical Behavior • Delamination
Table of Contents
Overview
Newaz G.
Process Modeling of Thermoplastic Matrix Composites
Leung C., Liao T.
Resin Impregnation During the Manufacture of Thermoplastic Matrix Composite Materials
Coulter J., Güçeri S.
The Effect of Processing on Autohesive Strength Development in Thermoplastic Resins and Composites
Hinkley J., Howes J., Loos A.
Thermoplastic Coating of Carbon Fibers
Drews M., Edie D., Ellison M., Gantt B., Lickfield G.
Pultrusion Process Modeling
Hackett R., Prasad S.
Thermoplastic Matrix Composites: Finite-Element Analysis of Mode I and Mode II Failure Specimens
Bankert R., Lambropoulos N., Shephard M., Sternstein S.
A Study of Graphite/PEEK Under High Temperatures
Palazotto A., Ramey J.
Load-Frequency Effect on Fatigue Life of IMP6/APC-2 Thermoplastic Composite Laminates
Dan-Jumbo E., Sun C., Zhou S.
Response of Notched AS4/PEEK Laminates to Tension/Compression Loading
Simonds R., Stinchcomb W.
Investigation into Thermal Conductivity of Composite Materials for Electronics Packaging
Chervenak J., Hoffman R., Tye R.
Stress-State Effects on the Viscoelastic Response of Polyphenylene Sulfide (PPS) Based Thermoplastic Composites
Myers F.
Fiber Orientation and Fracture Morphology in Short Fiber-Reinforced Thermoplastics
Burrett P., Hahn H., Jerina K.
Mechanical Properties of the Carbon Fiber/PEEK Composite APC-2/AS-4 for Structural Applications
Carlile D., Leach D., Moore D., Zahlan N.
Effects of Moisture Content on the Mechanical Properties of Polyphenylene Sulfide Composite Materials
Chen J., Hoa S., Lin S.
Moisture Effects on Mode I Interlaminar Fracture Toughness of a Graphite Fiber Thermoplastic Matrix Composite
Lucas J., Odegard B.
Interlaminar Fracture Toughness of Thermoplastic Composites
Hinkley J., Johnston N., O'Brien T.
Delamination Growth Under Cyclic Loading at Elevated Temperature in Thermoplastic Composites
Lustiger A., Newaz G., Yung J.
Delamination Resistance of Stitched Thermoplastic Matrix Composite Laminates
Su K.
Author Index
Subject Index
Committee: D30
Paper ID: STP1044-EB
DOI: 10.1520/STP1044-EB
ISBN-EB: 978-0-8031-5099-7
 ASTM International is a member of CrossRef.
0-8031-1272-6
978-0-8031-1272-8
STP1044-EB
|
