|
|
|
SEDL / STP / STP1016-EB
 |
STP1016
Implication of Aggregates in the Design, Construction, and Performance of Flexible Pavements
Schreuders HG, Marek CR
Pages: 187
Published: 1989
|
|
A practical approach to road and paving problems and testing for those who must make good road surfaces with available aggregate materials. Ten papers include • Performance of a Thin Surfaced, Crushed Stone Base Pavement • Measuring the Susceptibility of Emulsion Based Seal Coats to Debonding • Hot Mix Asphalt Moisture Susceptibility Problems: The Need to Test and Specify via a Common Procedure.
Table of Contents
Overview
Marek C.
Utilization of Low-Quality Aggregates in Asphaltic Mixtures in the Eastern Province of Saudi Arabia
Abdulshafi A., Al-Dhalaan M.
Performance of a Thin-Surfaced, Crushed-Stone Base Pavement
Barksdale R., Bush A., Greene R., Machemehl C.
Effect of Aggregates on Performance of Bituminous Concrete
Brown E., Crawley A., McRae J.
Use of Thin Asphalt Surfaces over Aggregate Base Course for Heavy-Axle Truck Loads
Dukatz E.
Hot-Mix Asphalt Moisture Susceptibility Problems: The Need to Test and Specify via a Common Procedure
Dukatz E., Phillips R.
Factors that Influence Moisture Damage in Asphaltic Pavements
Hughes C., Maupin G.
Rutting, Asphalt Mix-Design, and Proposed Test Road in Saudi Arabia
Al-Dhalaan M., Lee K.
Evaluation of Percent Fracture and Gradation on the Behavior of Asphalt Concrete Mixtures
Hicks R., Lundy J., McHattie R.
Measuring the Susceptibility of Emulsion Based Seal Coats to Debonding
Heidari N., Selim A.
Prediction of Permanent Deformation in Flexible Pavement Materials
Lytton R., Tseng K.
Author Index
Subject Index
Committee: D04
Paper ID: STP1016-EB
DOI: 10.1520/STP1016-EB
ISBN-EB: 978-0-8031-5077-5
 ASTM International is a member of CrossRef.
0-8031-1193-2
978-0-8031-1193-6
STP1016-EB
|
