STP1533

    Use of the ASTM Inter-Laboratory Studies (ILS) Program in Developing Precision Data for ASTM D5755 — Asbestos in Dust by Microvacuum Sampling

    Published: Jan 2011


      Format Pages Price  
    PDF (92K) 8 $25   ADD TO CART
    Complete Source PDF (4.6M) 8 $90   ADD TO CART


    Abstract

    ASTM Standard D5755 “Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy (TEM) for Asbestos Structure Number Concentration” uses a microvacuuming sampling procedure and transmission electron microscopy analysis to (a) identify asbestos in surface dust and (b) provide an estimate of the surface loading of asbestos in the sampled dust reported as the number of asbestos structures per unit area of sampled surface. In a precision study of the method, ten laboratories analyzed chrysotile asbestos-containing World Trade Center dust that had been resuspended in a test room and collected off of non-asbestos floor tiles following the microvacuum cassette (microvac) collection procedures described in ASTM D5755. Each laboratory analyzed the same sample twice. The Inter-Laboratory Studies (ILS) Group of ASTM International performed the statistical examination of the data set and found a repeatability limit (r) of 61.80 and a reproducibility limit (R) of 239.30. The study data was also used to calculate coefficients of variation of 0.15 intra-laboratory and 0.6 inter-laboratory.

    Keywords:

    asbestos, settled dust, precision, WTC dust


    Author Information:

    Millette, James R.
    MVA Scientific Consultants,


    Paper ID: STP49752S

    Committee/Subcommittee: D22.04

    DOI: 10.1520/STP49752S


    CrossRef ASTM International is a member of CrossRef.