STP285

    Experience with Vibratory Polishers and Design for Hot-Cell Application

    Published: Jan 1960


      Format Pages Price  
    PDF (552K) 11 $25   ADD TO CART
    Complete Source PDF (7.2M) 11 $55   ADD TO CART


    Abstract

    Vibratory polishers have been in use in the Metallography Department of the Metallurgy Division of Oak Ridge National Laboratory (ORNL) for approximately four years. During this period, vibratory polishing changed from a complementary tool for standard metallographic techniques to the prime method of specimen preparation. An estimated 90 per cent of all specimens are now prepared through vibratory polishing in this department.

    With the advent of the new hot-cell facility to be constructed at ORNL, this department was requested to plan to equip the metallography cells. Plans were made for adaptation to remote operation, based on past experience with the vibratory polishers in the “cold” laboratory and several features unique to the polishers. Several necessary design changes were made which in turn had to be compensated for in the vibratory system to maintain proper polishing action. To complement the remoted polishers a new specimen holder was designed which allows easy insertion and removal of the specimens using Master Slave type manipulators.


    Author Information:

    Long, E L
    Metallurgy Division, Oak Ridge National Laboratory, Oak Ridge, Tenn.

    Meador, J T
    Reactor Projects Division, Oak Ridge National Laboratory, Oak Ridge, Tenn.

    Gray, R J
    Metallurgy Division, Oak Ridge National Laboratory, Oak Ridge, Tenn.


    Paper ID: STP44352S

    Committee/Subcommittee: E04.01

    DOI: 10.1520/STP44352S


    CrossRef ASTM International is a member of CrossRef.