STP559: Dynamic Compact Tension Testing for Fracture Toughness

    Paris, PC
    Chairman and chief executive officerVisiting Professor of Engineering, Del Research CorporationBrown University, HellertownProvidence, Pa.R. I.

    Bucci, RJ
    senior engineer, Alcoa Laboratories, Alcoa Center, Pa.

    Loushin, LL
    Esso Research and Engineering Company, Florham Park, N. J.

    Pages: 13    Published: Jan 1974


    Abstract

    Within this paper it is demonstrated that dynamic fracture toughness evaluation may be made by adherence to the ASTM Test for Plane-Strain Fracture Toughness of Metallic Materials (E 399-72) procedure with the single exception of test speed. The test procedure, specimen, fixturing, and instrumentation are otherwise identical to ASTM E 399-72. This makes possible direct comparisons of static, KIc values with the results of these dynamic tests.

    The additional equipment required for these tests, over the normal servocontrolled hydraulic test machine typically used for KIc testing, is only the provision of a high flow and high response servo-valve with hydraulic accumulators and the capability of dynamic data storage (digital) for convenient playback into the usual X-Y recording unit.

    Employing the test technique developed, dynamic fracture toughness evaluation was demonstrated on two steel alloys (302 B and A516-70) tested at room and -50° F temperatures.

    Keywords:

    fracture properties, dynamic tests, mechanical properties, crack propagation, evaluation


    Paper ID: STP38594S

    Committee/Subcommittee: E08.08

    DOI: 10.1520/STP38594S


    CrossRef ASTM International is a member of CrossRef.