STP1117: Damage Measurements on Optical Materials for Use in High-Peak-Power Lasers

    Rainer, F
    Lawrence Livermore National Laboratory, Livermore, CA

    Brusasco, RM
    Lawrence Livermore National Laboratory, Livermore, CA

    Campbell, JH
    Lawrence Livermore National Laboratory, Livermore, CA

    De Marco, FP
    Lawrence Livermore National Laboratory, Livermore, CA

    Gonzales, RP
    Lawrence Livermore National Laboratory, Livermore, CA

    Kozlowski, MR
    Lawrence Livermore National Laboratory, Livermore, CA

    Milanovich, FP
    Lawrence Livermore National Laboratory, Livermore, CA

    Morgan, AJ
    Lawrence Livermore National Laboratory, Livermore, CA

    Scrivener, MS
    Lawrence Livermore National Laboratory, Livermore, CA

    Staggs, MC
    Lawrence Livermore National Laboratory, Livermore, CA

    Thomas, IM
    Lawrence Livermore National Laboratory, Livermore, CA

    Velsko, SP
    Lawrence Livermore National Laboratory, Livermore, CA

    Wolfe, CR
    Lawrence Livermore National Laboratory, Livermore, CA

    Pages: 10    Published: Jan 1990


    Abstract

    Recently, we have expanded our efforts to develop state-of-the-art optical components for use in large-scale, high-peak-power, solid state lasers. Laser-induced damage to many of these components sets critical constraints on construction costs and limits the peak powers attainable in current and proposed devices. Increasing the damage threshold whenever possible by improving materials fabrication technology is therefore the ultimate goal of our work. The optical components and technological developments we are investigating are: Highly reflective mirrors • Kilo-layer coatings fabricated by high-temperature, plasma chemical vapor deposition (PCVD) • Laser conditioned physical-vapor-deposition (PVD) coatings • Multi-layer sol-gel coatings Anti-reflective coatings • Single layer sol-gel coatings deposited on substrates and non-linear crystals Non-linear crystals • High purity KDP, LAP and related frequency conversion crystals Substrates and laser hosts • High threshold surface preparation techniques • High threshold bulk materials Polarizers • Advanced PVD multi-layer coatings

    Our research has resulted in an extensive database of laser-damage measurements. We present summaries of these measurements with particular emphasis on those taken at 1064 nm and 355 nm.

    Keywords:

    antireflective (AR) coatings, bare substrates, bulk damage, conditioning, damage, frequency conversion crystals, highly reflective (HR) coatings, laser-induced damage, plasma chemical vapor deposition (PCVD), polarizers, reflectors, sol-gel coatings, thin films


    Paper ID: STP26476S

    Committee/Subcommittee: E13.15

    DOI: 10.1520/STP26476S


    CrossRef ASTM International is a member of CrossRef.