STP1123: Determination of Leaching Characteristics of Waste Materials Leading to Environmental Product Certification

    de Groot, GJ
    Project manager and senior scientist, Netherlands Energy Research Foundation, Petten,

    van der Sloot, HA
    Project manager and senior scientist, Netherlands Energy Research Foundation, Petten,

    Pages: 22    Published: Jan 1992


    Abstract

    Quantifying the environmental impact of potentially hazardous materials in a wide variety of applications and disposal scenarios is essential to proper management of these materials. In an environmental assessment, the release of contaminants from the waste body with time has to be determined rather than aiming at concentration limits as currently used. In this approach, test results should yield information on leach rates. This implies the use of test methods other than those currently applied in the regulatory framework (EP, TCLP, DIN 38414-S4).

    The tank leaching procedure proved to be a proper method for characterizing the leaching behavior of trace contaminants from construction materials and stabilized waste products. Distinction between different leaching mechanisms is possible: dissolution, surface washoff, and matrix diffusion. Leach parameters, which allow estimating release at much longer time scales than the duration of the actual experiment, can be obtained from the tank leaching test. These parameters [availability for leaching, physical retardation (tortuosity), and chemical retention] offer control over the environmental quality of materials. A calculation method, different from the methods that have been published so far in the literature, is proposed for determinating the leaching mechanism in the material.

    The paper shows that the traditionally used one-dimensional model cannot predict long-term release with sufficient accuracy in actual applications because it does not take into account the limited leachable amount and the dimensions of the material. Since a one-dimensional model cannot describe the release with time as a function of different material shapes, even when depletion of the source is accounted for, at Netherlands Energy Research Foundation (ECN) a three-dimensional model is currently being developed that does offer these capabilities. Some preliminary results are presented. The variation found in the test results within one category of materials is relatively small and indicates that possibilities for developing short tests exist. For certification activities and quality control, this would be useful in creating a framework for environmental control parallel to technical product quality.

    At ECN a database for leach data has been developed. Storing detailed leach data on different construction materials and stabilized waste products in a database offers opportunities for a more efficient use of costly leaching studies. The knowledge gained by gathering information on a wide variety of materials may prove particularly useful in establishing systematic trends in leaching and selecting new directions for reusing waste materials. Also, a database will be a very useful tool in the environmental certification process for construction materials containing waste materials. It can be concluded that test methods tailored to a utilization option offer better possibilities than a single shake test for making proper choices in the wide variety of materials in an even wider range of possible applications.

    Keywords:

    hazardous elements, waste materials, construction materials, leaching mechanisms, tank leach test, diffusion, diffusion models, certification, database


    Paper ID: STP19548S

    Committee/Subcommittee: D34.01

    DOI: 10.1520/STP19548S


    CrossRef ASTM International is a member of CrossRef.