STP1023

    Growth, Fracture, and Nondestructive Evaluation of Hydride Blisters in Zr-2.5 Nb Pressure Tubes

    Published: Jan 1989


      Format Pages Price  
    PDF (388K) 16 $25   ADD TO CART
    Complete Source PDF (19M) 16 $148   ADD TO CART


    Abstract

    Rupture of a cold-worked Zircaloy-2 pressure tube in Pickering Unit 2 in 1983 occurred when a crack developed from an array of hydride blisters. These had formed on the outside surface of the pressure tube where it contacted the surrounding calandria tube. Fol-lowing this event, a comprehensive research program was initiated by Ontario Hydro. Its objective was to determine the consequences of pressure tube-calandria tube contact for channels in other reactors with Zr-2.5 Nb pressure tubes. The purpose of this paper is to present some of the results that have been obtained in the areas of blister growth, fracture, and nondestructive evaluation and to show how these results may be applied to Canada Deuterium Uranium (CANDU) reactor inspection.

    Blisters were grown both on small specimens and on pressurized tubes. Blisters were ob-served to grow by gradual precipitation of hydride platelets throughout a volume that also increased with time. Blister growth rates increased rapidly with increasing average temperature. The hydride distribution in the blisters has been observed to be highly variable.

    Four-point bending fracture tests were carried out on the small specimen blisters. These fracture tests indicate that blister size is a key parameter in determining the stress required to crack the blister with larger blisters cracking at lower applied stresses. This trend is shown to be consistent with previous finite-element modelling, which incorporated hydride plasticity.

    Two of the pressurized tubes were inspected with a specially designed ultrasonic head, and responses were correlated with metallographic information. The ultrasonic inspection system was capable of detecting cracks as small as 0.15 mm deep in small blisters. This gives some expectation that inspection will be able to identify blistered tubes.

    Keywords:

    hydride blister, fracture, growth, Zr-2.5 Nb, ultrasonic inspection, CANDU, pressure tube


    Author Information:

    Leger, M
    Headengineer, Ontario Hydro Research Division, Toronto, Ontario

    Moan, GD
    Metallurgist, Atomic Energy of Canada, CANDU Operations, Toronto, Ontario

    Wallace, AC
    Headengineer, Ontario Hydro Research Division, Toronto, Ontario

    Watson, NJ
    Engineer, Ontario Hydro, Toronto, Ontario


    Paper ID: STP18857S

    Committee/Subcommittee: B10.05

    DOI: 10.1520/STP18857S


    CrossRef ASTM International is a member of CrossRef.