STP1111

    Test Developments for Polymers in Oxygen-Enriched Environments

    Published: Jan 1991


      Format Pages Price  
    PDF Version (308K) 17 $25   ADD TO CART
    Complete Source PDF (11M) 17 $69   ADD TO CART


    Abstract

    Two newly developed methods are discussed that examine ignition and flammability characteristics of polymers in oxygen-enriched environments. These methods were tested with three types of polymers (acrylonitrile butadiene, high-density polyethylene, and polytetrafluoroethylene). The first method comprises a tube furnace assembly and a quartz tube through which a test gas is flowed over a polymer sample located in a combustion boat. The combustion gas flowing through the infrared test cell is analyzed for pyrolysis products using a Fourier transform infrared (FTIR) spectrometer. By measuring the spectral characteristics of the reactant products (spectral absorption bands) as a function of the sample temperature, it is possible to determine some of the pyrolysis properties of the materials. Inspection of the sample while the temperature increases is made possible by viewing the sample through an oblique field-of-view angle to the quartz sampling tube. The sample is monitored visually or recorded with a video camera. Visual monitoring for flame emissions allows for positive identification of the auto-ignition temperature (AIT). With the exception of the high-density polyethylene, the AIT results were in good agreement with previously published values. The FTIR spectrometer was demonstrated to be extremely sensitive for characterizing the compatibility of polymer materials with oxygen. The second method discussed is a modification to a Differential Scanning Calorimeter (DSC). This device, which utilizes a silicon photodiode coupled to the DSC chamber via a light pipe assembly, is used to detect radiative flame emissions from a polymer test sample, The modification provides a method of identifying the AIT threshold, while simultaneously measuring endothermic and exothermic responses. The photodiode detector assembly has been adapted for use with the high-pressure DSC cell configuration. The visible wavelength bandpass of the silicon photodiode has a weak response to the radiation heat of the sample or DSC chamber for temperatures under 500 K. Thus, flames with temperatures in excess of 500 K are easily distinguished from the radiative response of the chamber or slow reaction rates (no visible flame emissions). The testing of the DSC demonstrated the merit of using the radiative flame emissions as the primary signature for the identification of the auto-ignition condition. The method reduces or eliminates ambiguity associated with interpretation of exothermic reactions. Thus, the new instrumentation provides viable methods of determining the AIT for polymers in oxygen-enriched environments.

    Keywords:

    Auto-ignition, differential scanning calorimetry, flame emissions, IR absorption spectroscopy, oxygen compatibility testing, photodiode detectors, pyrolysis, pyrolysis products


    Author Information:

    Tapphorn, RM
    Principal ScientistSenior ScientistChief, Lockheed-ESCLaboratories Office with NASA/JSC, Las Cruces, NM

    Shelley, R
    Principal ScientistSenior ScientistChief, Lockheed-ESCLaboratories Office with NASA/JSC, Las Cruces, NM

    Benz, F
    Principal ScientistSenior ScientistChief, Lockheed-ESCLaboratories Office with NASA/JSC, Las Cruces, NM


    Paper ID: STP17756S

    Committee/Subcommittee: G04.01

    DOI: 10.1520/STP17756S


    CrossRef ASTM International is a member of CrossRef.