Dynamic Mechanical Analysis as a Complementary Damage Characterization Technique for Composite Materials

    Published: Jan 1992

      Format Pages Price  
    PDF (320K) 20 $25   ADD TO CART
    Complete Source PDF (7.5M) 20 $91   ADD TO CART


    The applicability of mechanical spectroscopy as a potential complementary technique to characterize damage and fatigue response of fiber-reinforced laminates was investigated. The interaction between damage induced by cyclic mechanical loads and time-dependent behavior was examined [1,2]. The magnitude and nature of the damage and mechanical response were evaluated.

    The effects of fatigue damage on the time, temperature, and frequency response of fiber-reinforced laminates were measured by performing dynamic mechanical analysis (DMA) tests on composite coupons which had been subjected to different amounts of fatigue loading and which exhibit varying degrees of fatigue-induced damage. Creep tests at different temperatures were conducted. Frequency multiplexing was accomplished over a temperature range encompassing the glass transition temperature. The effects of frequency on the temperature transitions of the loss and storage moduli were observed.

    The DMA test results were interpreted in light of other conventional measures of fatigue response, such as change in dynamic stiffness and residual strength, and compared to nondestructive evaluation data of the different damage modes present in the laminates.

    This paper includes a discussion of the applicability of DMA as a potential test methodology to investigate the effects of fatigue-induced damage on the viscoelastic behavior of fiber-reinforced laminates.


    composite materials, fatigue, creep, damage, dynamic mechanical analysis, nondestructive testing

    Author Information:

    Osiroff, R
    Graduate project assistant, Virginia Polytechnic Institute and State University, Blacksburg, VA

    Stinchcomb, WW
    Graduate project assistant, Virginia Polytechnic Institute and State University, Blacksburg, VA

    Committee/Subcommittee: D30.04

    DOI: 10.1520/STP14569S

    CrossRef ASTM International is a member of CrossRef.