STP1201

    Elevated Temperature Behavior of Sintered Silicon Nitride Under Pure Tension, Creep, and Fatigue

    Published: Jan 1994


      Format Pages Price  
    PDF Version (412K) 17 $25   ADD TO CART
    Complete Source PDF (7.5M) 17 $65   ADD TO CART


    Abstract

    Pure tensile fast fracture, tensile creep, and tensile cyclic fatigue/creep interaction data are reported for GTE SNW-1000 sintered silicon nitride (Si3N4) which is being investigated as a candidate material for advanced heat engine applications.

    Pure uniaxial tensile tests conducted at room temperature and at elevated temperatures indicate that the tensile strength of this material was retained to 1100°C, above which there was a sharp decrease in strength.

    Tensile creep tests performed at 1100°C and 1200°C showed that the steady state creep rate was dependent on both the temperature and the applied stress, the effect of temperature being more dominant than the applied stress. Further, creep induced deformation by linking of small pores, and changes in the chemical contents were observed.

    The effect of cyclic loading on creep, and residual tensile strength were also studied at 1200°C. Test results showed that precycling can dramatically increase creep resistance. Cyclic loading at 1200°C also increases the strength of the material.

    Keywords:

    ceramic, silicon nitride, tension, creep, fatigue, fracture


    Author Information:

    Sankar, J
    Associate Professor, North Carolina A & T State University, Greensboro, North Carolina

    Krishnaraj, S
    Associate Professor, North Carolina A & T State University, Greensboro, North Carolina

    Vaidyanathan, R
    Graduate Student and Research Associate, North Carolina A & T State University, Greensboro, North Carolina

    Kelkar, AD
    Associate Professor, North Carolina A & T State University, Greensboro, North Carolina


    Paper ID: STP12773S

    Committee/Subcommittee: C28.03

    DOI: 10.1520/STP12773S


    CrossRef ASTM International is a member of CrossRef.