STP1453: Sealant Longevity for Residential Ducts

    Walker, IS
    Staff Scientist and Senior Scientist, Lawrence Berkeley National Laboratory, Berkeley, CA

    Sherman, MH
    Staff Scientist and Senior Scientist, Lawrence Berkeley National Laboratory, Berkeley, CA

    Pages: 15    Published: Jan 2004


    Abstract

    Duct leakage is a major source of energy loss in residential buildings. Most duct leakage occurs at the connections to registers, plenums, or branches in the duct system. At each of these connections, a method of sealing the duct system is required. Typical sealing methods include tapes or mastics applied around the joints in the system. Field examinations of duct systems have shown that taped seals tend to fail over extended periods of time. The Lawrence Berkeley National Laboratory (LBNL) has been testing sealant longevity for several years. The accelerated test method developed by LBNL is being used as a basis for an ASTM standard under sub-committee E6.41. LBNL tests found that typical duct tape (i.e., fabric backed tapes with rubber adhesives) fails more rapidly than all other duct sealants. LBNL has also tested advanced tape products being developed by major manufacturers. The results of these tests showed that the major weaknesses of the tapes that fail are the use of natural rubber adhesives and the mechanical properties of the backing.

    Keywords:

    duct leakage, UL181B, duct tape, flex duct, sealant longevity


    Paper ID: STP12565S

    Committee/Subcommittee: C24.80

    DOI: 10.1520/STP12565S


    CrossRef ASTM International is a member of CrossRef.