MNL20-2ND

    Corrosion Tests and Standards: Application and Interpretation-Second Edition

    Baboian R

    Pages: 867

    Published: 2005

    PDF (65M)    $269

    Print    $269

    Print + PDF    $403.50    Save 25%    more info



    REVISED AND UPDATED, the newest edition of Manual 20, a highly respected publication, provides guidelines for recognizing types of corrosion, as well as the fundamentals of testing. It provides the most recent technologies for making calculations, interpretations, and correlations, and serves as a source book for procedures, equipment, and standards used in testing.

    Eight sections cover:

    General Information provides the tools to define, interpret, and evaluate the technology. Greatly expanded, this section includes a UNS for metals and alloys and their common names; standards terminology; SI and matrix guide; general conversion tables; corrosion rate calculations and all necessary conversion factors; and much more. :

    Testing and Evaluation includes planning and design of tests, types of corrosion data, metallographic and surface analysis, statistical treatment of data, data computerization and computer applications:

    Types of Tests examines laboratory-accelerated tests, field tests, and service tests. This section describes test techniques and specific considerations such as specimen preparation, test duration, acceleration factors, and pertinent standards:

    Testing for Corrosion Types covers uniform, pitting, crevice, galvanic, intergranular, exfoliation, erosion, cavitation, fretting, dealloying, stress corrosion, corrosion fatigue and hydrogen damage:

    Testing in Environment addresses outdoor and indoor atmospheres, seawater, fresh water, soils, concrete, industrial waters, industrial chemical, petroleum, high-temperature gases, organic liquids, molten salts, liquid metals, corrosion inhibitors, in-vivo, and microbiological effects. :

    Materials Testing gives you an overview of important tests used in evaluating the corrosion behavior of metals and alloys, including zinc, lead, aluminum, steels, copper, nickel, stainless steels, cobalt-base alloys, titanium, zirconium and hafnium, tantalum and niobium alloys, metallic coatings on steel, nonmetallic coatings, metal matrix composites, electrodeposits, and powder metallurgy materials:

    Testing in Industries provides an overview of corrosion testing unique to each industry, including automotive, commercial aircraft, military aircraft and equipment, pipeline, highways, tunnels and bridges, marine-piers and docks, electric power, nuclear power, steam generation, flue gas desulphurization, electronics, telecommunications, metal processing, chemical processing, pulp and paper, petroleum production and refining, food and beverage, water handling systems, medical and dental, and pharmaceutical:

    Corrosion-Related Standards provides a comprehensive list of standards developed by various organizations including the American Petroleum Institute, American Waterworks Association, ASME International, ASTM International, International Electrotechnical Commission, ISO, NACE International, SAE International, and the Steel Structures Painting Council. :

    This new edition is certain to serve as a valuable resource for corrosion scientists and technologists in industry, government, and academia.


    Table of Contents

    Introduction
    Baboian R.

    Miscellaneous Information
    Baboain R.

    Corrosion-Related Standards
    Hack H., Baboian R.

    Chapter 1-Planning and Design of Tests
    Baboian R., Cramer S., Jones B.

    Chapter 2-Types of Data
    Baboian R., Silverman D.

    Chapter 3-Metallographic Analysis
    Baboian R., Colwell R.

    Chapter 4-Surface Analysis
    Baboian R., Hopkins A.

    Chapter 5-Statistical Treatment of Data, Data Interpretation, and Reliability
    Baboian R., Haynie F.

    Chapter 6-Computer Based Data Organization and Computer Applications
    Baboian R., Roberge P.

    Chapter 7-Electrochemical Tests
    Hack H., Scully J.

    Chapter 8-Cabinet Tests
    Hack H., Meade C.

    Chapter 9-Immersion Testing
    Hack H., Corbett R.

    Chapter 10-High-Temperature and High-Pressure Corrosion Testing
    Hack H., Kane R.

    Chapter 11-Atmospheric
    Hack H., Dean S.

    Chapter 12-Seawater
    Hack H., Jenkins J.

    Chapter 13-Freshwater
    Hack H., Young W., Fairer P.

    Chapter 14-Soils
    Hack H., Escalante E.

    Chapter 15-Industrial Applications
    Hack H., Perkins A.

    Chapter 16-High-Temperature
    Hack H., Smith G.

    Chapter 17-Uniform Corrosion
    Schully J., Ellor J., Repp J.

    Chapter 18-Pitting
    Hack H., Kelly R.

    Chapter 19-Crevice Corrosion
    Schully J., Sridhar N., Dunn D., Brossia C., Cragnolino G., Kearns J.

    Chapter 20-Galvanic
    Schully J., Hack H.

    Chapter 21-Intergranular
    Schully J., Streicher M.

    Chapter 22-Exfoliation
    Schully J., Sprowls D., Cooper K.

    Chapter 23-Erosion, Cavitation, and Fretting
    Schully J., Glaeser W.

    Chapter 24-Dealloying
    Schully J., Van Orden A.

    Chapter 25-Environmental Cracking-Stress Corrosion
    Schully J., Lisagor W.

    Chapter 26-Environmental Cracking-Corrosion Fatigue
    Schully J., Gangloff R.

    Chapter 27-Hydrogen Damage
    Hack H., Interrante C., Raymond L.

    Chapter 28-Outdoor Atmospheres
    Hack H., Lawson H.

    Chapter 29-Indoor Atmospheres
    Hack H., Sinclair J.

    Chapter 30-Seawater
    Hack H., Shifter D., Aylor D.

    Chapter 31-Freshwater
    Hack H., Young W., Fairer P.

    Chapter 32-Soils
    Hack H., Veleva L.

    Chapter 33-Concrete
    Hack H., Berke N.

    Chapter 34-Industrial Waters
    Hack H., Krisher A.

    Chapter 35-Industrial Chemicals
    Hack H., Puyear R.

    Chapter 36-Petroleum
    Hack H., Efird K.

    Chapter 37-High-Temperature Gases
    Hack H., Smith G., Baker B.

    Chapter 38-Organic Liquids
    Hack H., Brossia C., Shifter D.

    Chapter 39-Molten Salts
    Hack H., Pettit F.

    Chapter 40-Liquid Metals
    Hack H., Bagnall C., Tortorelli P., Pawel S., DeVan J., Schrock S.

    Chapter 41-Corrosion Inhibitors
    Hack H., Hausler R.

    Chapter 42-Corrosion Testing in In Vivo Environments
    Hack H., Bundy K.

    Chapter 43-Microbiological Effects
    Hack H., Dexter S.

    Chapter 44-Zinc
    Hibner E., Goodwin F., Alhassan S.

    Chapter 45-Lead (and Alloys)
    Hibner E., Alhassan S., Goodwin F.

    Chapter 46-Magnesium (and Alloys)
    Hibner E., Hillis J.

    Chapter 47-Aluminum (and Alloys)
    Hibner E., Lifka B.

    Chapter 48-Steels
    Hibner E., Komp M., Jordan D., Baboian R.

    Chapter 49-Copper (and Alloys)
    Hibner E., Cohen A.

    Chapter 50-Nickel (and Alloys)
    Hibner E., Hibner E.

    Chapter 51-Stainless Steels
    Hibner E., Martin J.

    Chapter 52-Cobalt-Base Alloys
    Hibner E., Crook P.

    Chapter 53-Titanium
    Hibner E., Schutz R.

    Chapter 54-Zirconium and Hafnium
    Hibner E., Yau T.

    Chapter 55-Tantalum and Niobium Alloys
    Hibner E., Hinshaw E., Moser K.

    Chapter 56-Metallic Coatings on Steel
    Hibner E., Simpson T., Townsend H.

    Chapter 57-Nonmetallic Coatings
    Hibner E., Granata R.

    Chapter 58-Metal-Matrix Composites
    Hibner E., Hihara L.

    Chapter 59-Electrodeposits
    Hibner E., Moffat T.

    Chapter 60-Powder Metallurgy (P/M) Materials
    Hibner E., Klar E., Samal P.

    Chapter 61-Automotive
    Dean S., Baboian R.

    Chapter 62-Commercial Aircraft
    Dean S., Adjorlolo A., Marceau J.

    Chapter 63-Military Aircraft and Associated Equipment
    Dean S., Groshart E.

    Chapter 64-Pipeline
    Dean S., Rothman P., Young W.

    Chapter 65-Highways, Tunnels, and Bridges
    Dean S., Bushman J., Choker V.

    Chapter 66-Marine-Piers and Docks
    Dean S., Jenkins J.

    Chapter 67-Electric Power
    Dean S., Mayer P., Pellgrini A.

    Chapter 68-Nuclear Power
    Dean S., Licina G.

    Chapter 69-Steam Generation
    Dean S., Jonas O.

    Chapter 70-Flue Gas Desulfurization
    Dean S., Rosenberg H., Dille E.

    Chapter 71-Electronics
    Dean S., Baboian R.

    Chapter 72-Telecommunications
    Dean S., Schick G.

    Chapter 73-Metals Processing
    Dean S., DeBold T.

    Chapter 74-Chemical Processing
    Dean S., Moniz B., Zhang S.

    Chapter 75-Pulp and Paper
    Dean S., Wensley A.

    Chapter 76-Petroleum Production and Refining
    Dean S., Tuttle R.

    Chapter 77-Food and Beverage
    Dean S., Clayton W., Tholke B.

    Chapter 78-Water Handling Systems
    Dean S., Boffardi B.

    Chapter 79-Medical and Dental
    Dean S., Fraker A.

    Chapter 80-Pharmaceutical
    Dean S., Jensen D.

    Author Index
    Hack H., Baboian R.

    Subject Index


    Committee: G01

    Paper ID: MNL20-2ND-EB

    DOI: 10.1520/MNL20-2ND-EB

    ISBN-EB: 978-0-8031-4555-9

    ISBN-PRINT: 978-0-8031-2098-3


    ASTM International is a member of CrossRef.

    0-8031-2098-2
    978-0-8031-2098-3
    MNL20-2ND-EB

    MNL 20-2ND