Digital Library / Journal of Testing and Evaluation (JTE) / Table of Contents


1978
Volume 6, Issue 3 (May 1978)


THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


The Effect of Interference on the Dimpled, Loaded-Hole Fatigue Strength of 2024-T3 Alclad® Aluminum Alloy
Kuc A., Shewchuk J.
Page Count: 10
Published: 01 May 1978
Abstract
Download PDF PDF (460K)
Paper ID: JTE10937J
DOI: 10.1520/JTE10937J


Computer-Controlled Decreasing Stress Intensity Technique for Low Rate Fatigue Crack Growth Testing
Saxena A., Hudak S., Donald J., Schmidt D.
Page Count: 8
Published: 01 May 1978
Abstract
Download PDF PDF (276K)
Paper ID: JTE10938J
DOI: 10.1520/JTE10938J


Frequency, Stress Ratio, and Potential Effects on Fatigue Crack Growth of HY130 Steel in Salt Water
Vosikovsky O.
Page Count: 8
Published: 01 May 1978
Abstract
Download PDF PDF (436K)
Paper ID: JTE10939J
DOI: 10.1520/JTE10939J


Surface-Crack Shape Change in Bending Fatigue Using an Inexpensive Resonant Fatiguing Apparatus
Pierce W., Shannon J.
Page Count: 6
Published: 01 May 1978
Abstract
Download PDF PDF (308K)
Paper ID: JTE10940J
DOI: 10.1520/JTE10940J


Phase Extraction and Analysis in Superalloys—Second Summary of Investigations by ASTM Subcommittee E04.91
Donachie M.
Page Count: 7
Published: 01 May 1978
Abstract
Download PDF PDF (292K)
Paper ID: JTE10941J
DOI: 10.1520/JTE10941J


Displacement Coefficients Along the Inner Boundaries of Radially Cracked Ring Segments Subject to Forces and Couples
Gross B.
Page Count: 6
Published: 01 May 1978
Abstract
Download PDF PDF (168K)
Paper ID: JTE10942J
DOI: 10.1520/JTE10942J


Low Energy Impact Behavior of Composite Panels
Aleszka J.
Page Count: 9
Published: 01 May 1978
Abstract
Download PDF PDF (640K)
Paper ID: JTE10943J
DOI: 10.1520/JTE10943J


Mechanical Properties in Bending at Elevated Temperature of High Strength Copper Alloy Flat Spring Materials
Fox A., Fuchs E.
Page Count: 10
Published: 01 May 1978
Abstract
Download PDF PDF (396K)
Paper ID: JTE10944J
DOI: 10.1520/JTE10944J


Evaluation of Correction Methods for Determining Load-Independent Knoop Microhardness
Young C., Rhee S.
Page Count: 10
Published: 01 May 1978
Abstract
Download PDF PDF (372K)
Paper ID: JTE10945J
DOI: 10.1520/JTE10945J


Evaluation of Cushion Dynamic Properties by Impedance Measurements
Nassar E.
Page Count: 6
Published: 01 May 1978
Abstract
Download PDF PDF (188K)
Paper ID: JTE10946J
DOI: 10.1520/JTE10946J


Miscellaneous Information
Page Count: 2
Published: 01 May 1978
Abstract
Download PDF PDF (JTE10947J)
Paper ID: JTE10947J
DOI: 180K