2013 Volume 41, Issue 2 (March 2013)

    THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.


    A Laboratory Study to Predict the Rutting and Fatigue Behavior of Asphalt Concrete Using the Indirect Tensile Test

    Wen H., Bhusal S.

    Page Count: 6

    Published: 01 March 2013

    View Abstract Buy PDF (684K)    $25

    Paper ID: JTE20120004

    DOI: 10.1520/JTE20120004


    Study on Glass Defect Inspection Based on Projecting Grating Method

    Jin Y., Wang Z., Zhu L., Yang J., Wei B.

    Page Count: 8

    Published: 01 March 2013

    View Abstract Buy PDF (3.2M)    $25

    Paper ID: JTE20120008

    DOI: 10.1520/JTE20120008


    Multiple Dependent State Sampling Plan Based on Process Capability Index

    Aslam M., Azam M., Jun C.

    Page Count: 7

    Published: 01 March 2013

    View Abstract Buy PDF (92K)    $25

    Paper ID: JTE20120012

    DOI: 10.1520/JTE20120012


    Stress-Relaxation Cracking Test for Welded Joints

    Kuhn B., Ullrich C., Tschaffon H., Beck T., Singheiser L.

    Page Count: 10

    Published: 01 March 2013

    View Abstract Buy PDF (1.9M)    $25

    Paper ID: JTE20120019

    DOI: 10.1520/JTE20120019


    Calibration of Seal Coat Application Rate Design

    Lee J., Ahn H., Shields T., Harris D., Li S.

    Page Count: 10

    Published: 01 March 2013

    View Abstract Buy PDF (2.1M)    $25

    Paper ID: JTE20120021

    DOI: 10.1520/JTE20120021


    Thermal Cracking Potential of High RAP-WMA Evaluated With Bending Beam Rheometer Mixture Beam Test

    Doyle J., Howard I.

    Page Count: 11

    Published: 01 March 2013

    View Abstract Buy PDF (984K)    $25

    Paper ID: JTE20120034

    DOI: 10.1520/JTE20120034


    Assessment of the Mean-Stress Sensitivity Factor Method in Stress-Life Fatigue Predictions

    Burger R., Lee Y.

    Page Count: 7

    Published: 01 March 2013

    View Abstract Buy PDF (860K)    $25

    Paper ID: JTE20120035

    DOI: 10.1520/JTE20120035


    Apparatus for Geosynthetic Interface Testing and Evaluation Under Elevated Temperature Conditions

    Karademir T., Frost J.

    Page Count: 11

    Published: 01 March 2013

    View Abstract Buy PDF (3.1M)    $25

    Paper ID: JTE20120036

    DOI: 10.1520/JTE20120036


    Use of Sweep Test for Emulsion and Hot Asphalt Chip Seals: Laboratory and Field Evaluation

    Wasiuddin N., Marshall A., Saltibus N., Saber A., Abadie C., Mohammad L.

    Page Count: 10

    Published: 01 March 2013

    View Abstract Buy PDF (13M)    $25

    Paper ID: JTE20120051

    DOI: 10.1520/JTE20120051


    Evaluation of Asphalt Blended With Low Percentage of Carbon Micro-Fiber and Nanoclay

    Yao H., Yao H., You Z., Li L., Goh S., Mills-Beale J., Shi X., Wingard D.

    Page Count: 11

    Published: 01 March 2013

    View Abstract Buy PDF ()    $25

    Paper ID: JTE20120068

    DOI: 10.1520/JTE20120068


    Exploration of a Performance Test for Emulsion Treated Asphalt Surfaces

    Braham A., Howard I., Barham J.

    Page Count: 9

    Published: 01 March 2013

    View Abstract Buy PDF (4.2M)    $25

    Paper ID: JTE20120076

    DOI: 10.1520/JTE20120076


    Advances in the Understanding of Gelation in the Framework of the Test ASTM D5133

    Maroto-Centeno J., Pérez-Gutiérrez T., Quesada-Pérez M.

    Page Count: 8

    Published: 01 March 2013

    View Abstract Buy PDF (420K)    $25

    Paper ID: JTE20120078

    DOI: 10.1520/JTE20120078


    Improved Digital Image Correlation Method for Eliminating Pixel Shape-Induced Errors in Shear-Strain Calculations

    Peng B., Peng B., Huang C., Zhou W., Yu H., Zeng Z.

    Page Count: 5

    Published: 01 March 2013

    View Abstract Buy PDF (1.3M)    $25

    Paper ID: JTE20120085

    DOI: 10.1520/JTE20120085


    Computation and Uncertainty Evaluation of Offset Yield Strength

    Matusevich A., Massa J., Mancini R.

    Page Count: 14

    Published: 01 March 2013

    View Abstract Buy PDF (2.1M)    $25

    Paper ID: JTE20120100

    DOI: 10.1520/JTE20120100


    Failure Analysis of a Set of Flapper Valves Under ALT With Alternative Test Device

    Martins J., Ferreira I., Leite D., Romão E.

    Page Count: 8

    Published: 01 March 2013

    View Abstract Buy PDF (1.6M)    $25

    Paper ID: JTE20120173

    DOI: 10.1520/JTE20120173


    Rate- and Temperature-Dependent Fracture Characteristics of Asphaltic Paving Mixtures

    Im S., Kim Y., Ban H.

    Page Count: 12

    Published: 01 March 2013

    View Abstract Buy PDF (2.3M)    $25

    Paper ID: JTE20120174

    DOI: 10.1520/JTE20120174


    Method for Assessing Applicability of an Artificial Flaw as a Small Initial Crack for Fatigue Limit Evaluation and Its Application to a Drill Hole and an FIB Processed Sharp Notch in Annealed 0.45% Carbon Steel

    Sakamoto J., Takahashi Y., Aono Y., Noguchi H.

    Page Count: 6

    Published: 01 March 2013

    View Abstract Buy PDF (632K)    $25

    Paper ID: JTE20120176

    DOI: 10.1520/JTE20120176


    The Damage Investigation of Wedge-Shaped Electromagnetic Riveting Structure of CFRP/Aluminium Alloy

    Liu S., Zhang W., Wu Y., Chen Y.

    Page Count: 6

    Published: 01 March 2013

    View Abstract Buy PDF (1.1M)    $25

    Paper ID: JTE20120179

    DOI: 10.1520/JTE20120179


    Compressive Behavior of Square-Cell Titanium Honeycomb

    Parsons R., Frink E., Lease K., Dubnicka S.

    Page Count: 9

    Published: 01 March 2013

    View Abstract Buy PDF (804K)    $25

    Paper ID: JTE20120194

    DOI: 10.1520/JTE20120194


    A Study on the Fitting Accuracy of CMOD Compliance Equations

    Wang E., Zhou W., Shen G.

    Page Count: 3

    Published: 01 March 2013

    View Abstract Buy PDF (92K)    $25

    Paper ID: JTE20120213

    DOI: 10.1520/JTE20120213