|
Digital Library / Journal of Testing and Evaluation (JTE) / Table of Contents
|
2007
Volume 35, Issue 3
(May 2007)
|
|
THIS ISSUE IS COMPLETE. for citation purposes, the official publication of this journal is the online version.
Combination of Transient Plane Source and Slug Calorimeter Measurements to Estimate the Thermal Properties of Fire Resistive Materials
Bentz D.
Page Count: 5
Published: 01 May 2007
Abstract
Download PDF PDF (224K)
Paper ID: JTE100033
DOI: 10.1520/JTE100033
Bitumen Surface Energy Characterization byqa Inverse Gas Chromatography
Hefer A., Little D., Herbert B.
Page Count: 6
Published: 01 May 2007
Abstract
Download PDF PDF (176K)
Paper ID: JTE100080
DOI: 10.1520/JTE100080
Short-Beam-Shear Testing of Composite Rings With Variable Cross Section as Representative for Full-scale Delamination
Samyn P., Van Schepdael L., Leendertz J., Van Paepegem W., De Baets P., Degrieck J.
Page Count: 11
Published: 01 May 2007
Abstract
Download PDF PDF (768K)
Paper ID: JTE100089
DOI: 10.1520/JTE100089
An Evaluation of Stress-Strain Property Prediction by Automated Ball Indentation (ABI) testing
Prakash R., Shin C.
Page Count: 12
Published: 01 May 2007
Abstract
Download PDF PDF (800K)
Paper ID: JTE100180
DOI: 10.1520/JTE100180
Methodology of Lifetime Predictionqa in Polymer Aging
Verdu J., Colin X., Fayolle B., Audouin L.
Page Count: 8
Published: 00 May 2007
Abstract
Download PDF PDF (128K)
Paper ID: JTE100477
DOI: 10.1520/JTE100477
New Method for Measuring Static Segregation of Self-Consolidating Concrete
Shen L., Struble L., Lange D.
Page Count: 7
Published: 01 May 2007
Abstract
Download PDF PDF (264K)
Paper ID: JTE100535
DOI: 10.1520/JTE100535
Test Method to Evaluate Bruising During Impacts to Apples and Compare Cushioning Materials
Jarimopas B., Sayasoonthorn S., Singh S., Singh J.
Page Count: 6
Published: 01 May 2007
Abstract
Download PDF PDF (240K)
Paper ID: JTE100584
DOI: 10.1520/JTE100584
Development of a Stress Corrosion Cracking Test Methodology Using Tube-shaped Specimens
Sato Y., He X., Takeda Y., Shoji T.
Page Count: 5
Published: 01 May 2007
Abstract
Download PDF PDF (184K)
Paper ID: JTE100628
DOI: 10.1520/JTE100628
Fatigue Prediction of Lightweight Thermoplastic Fiber-Metal Laminates
Kang H., Reyes-Villanueva G.
Page Count: 6
Published: 01 May 2007
Abstract
Download PDF PDF (208K)
Paper ID: JTE100670
DOI: 10.1520/JTE100670
Development of Double Edge Notched Tension (DENT) Test for Asphalt Binders
Zofka A., Marasteanu M.
Page Count: 7
Published: 01 May 2007
Abstract
Download PDF PDF (320K)
Paper ID: JTE100678
DOI: 10.1520/JTE100678
Methodology of Assessing Testing Variation for Volumetric Quantities in Hot Mix Asphalt Production
Pellinen T., Kuczek T.
Page Count: 8
Published: 01 May 2007
Abstract
Download PDF PDF (128K)
Paper ID: JTE100683
DOI: 10.1520/JTE100683
Texture Evaluation in Zr-2.5 % Nb Pressure Tubes Using Kearn’s f Parameter
Kapoor K., Padmaprabu C., Ramana Rao S., Sanyal T., Kashyap B.
Page Count: 11
Published: 01 May 2007
Abstract
Download PDF PDF (264K)
Paper ID: JTE11957
DOI: 10.1520/JTE11957
Monitoring Hole Quality in a Drilling Process Using a Fuzzy Subtractive Clustering-basedqa System Identification Method
Hayajneh M., Radaideh S.
Page Count: 6
Published: 01 May 2007
Abstract
Download PDF PDF (89K)
Paper ID: JTE12575
DOI: 10.1520/JTE12575
Crack Initiation Determination for Three-Point-Bend Specimens
Džugan J., Viehrig H.
Page Count: 9
Published: 01 May 2007
Abstract
Download PDF PDF (200K)
Paper ID: JTE12611
DOI: 10.1520/JTE12611
Laboratory-based Unified Permanent Deformation Model for Hot-Mix Asphalt Mixtures
Hajj E., Siddharthan R., Sebaaly P., Weitzel D.
Page Count: 9
Published: 01 May 2007
Abstract
Download PDF PDF (344K)
Paper ID: JTE13153
DOI: 10.1520/JTE13153
|