|
Digital Library / Journal of Testing and Evaluation (JTE) / Table of Contents
|
2004
Volume 32, Issue 4
(July 2004)
|
|
THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.
A Comparative Finite-Element Study of Hot Rolling and Plane Strain Compression Testing of Aluminum AA1050
Chen S., van der Zwaag S., van der Zwaag S.
Page Count: 8
Published: 01 July 2004
Abstract
Download PDF PDF (464K)
Paper ID: JTE10965
DOI: 10.1520/JTE10965
Laboratory Impulse Tests for Soil-Underground Structure Interactions
Helwany S., Chowdhury A.
Page Count: 12
Published: 01 July 2004
Abstract
Download PDF PDF (408K)
Paper ID: JTE11238
DOI: 10.1520/JTE11238
Effect of Surface Macrotexture on Skid Resistance Measurements by the British Pendulum Test
Liu Y., Fwa T., Choo Y.
Page Count: 6
Published: 01 July 2004
Abstract
Download PDF PDF (96K)
Paper ID: JTE11428
DOI: 10.1520/JTE11428
Mechanical Property Evaluation Using the Small Punch Test
Eskner M., Sandström R.
Page Count: 8
Published: 01 July 2004
Abstract
Download PDF PDF (164K)
Paper ID: JTE11504
DOI: 10.1520/JTE11504
Mechanistic-Empirical Characterization of Bonding Between Ultra-Thin White-Topping and Asphalt Pavement
Li S., Li Y., Way G., Noureldin S.
Page Count: 8
Published: 01 July 2004
Abstract
Download PDF PDF (116K)
Paper ID: JTE11776
DOI: 10.1520/JTE11776
On the Mechanical Behavior of Global Parameters in Material Characterization by Sharp Indentation Testing
Larsson P.
Page Count: 12
Published: 01 July 2004
Abstract
Download PDF PDF (212K)
Paper ID: JTE11851
DOI: 10.1520/JTE11851
The Response of 1CrMoV Rotor Steel to Service-Cycle Thermomechanical Fatigue Testing
Holdsworth S., Mazza E., Jung A.
Page Count: 7
Published: 01 July 2004
Abstract
Download PDF PDF (272K)
Paper ID: JTE11896
DOI: 10.1520/JTE11896
An Alternate Method to Determine Asphalt Content of Hot Mix Asphalt Using Volumetric Properties
Shaheed M., Tarefder R., Zaman M.
Page Count: 12
Published: 01 July 2004
Abstract
Download PDF PDF (208K)
Paper ID: JTE11925
DOI: 10.1520/JTE11925
Numerical Analysis for Small Punch Creep Tests by Finite-Element Method
Zhai P., Zhai P., Hashida T., Komazaki S., Zhang Q.
Page Count: 6
Published: 01 July 2004
Abstract
Download PDF PDF (168K)
Paper ID: JTE12250
DOI: 10.1520/JTE12250
On the Possibility of Avoiding the Use of a Clip Gage When Testing Precracked Charpy-V Specimens in the Ductile-to-Brittle Transition Region
Lucon E., Scibetta M., van Walle E.
Page Count: 6
Published: 01 July 2004
Abstract
Download PDF PDF (JTE11782)
Paper ID: JTE11782
DOI: 160K
Review of Steelwork Corrosion Control—Second Edition
Hack H.
Page Count: 1
Published: 01 July 2004
Abstract
Download PDF PDF (JTE12328)
Paper ID: JTE12328
DOI: 36K
|