Journal of Testing and Evaluation (JTE) - 1998

Digital Library / Journal of Testing and Evaluation (JTE) / Table of Contents

1998
Volume 26, Issue 6 (November 1998)

THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.

Evaluation of Wear Resistance of Snow Plow Blade Cutting Edges Using the Scratch Test Method
Wei Y., Nixon W., Shi Z.
Page Count: 5
Published: 01 November 1998
Abstract
Download PDF PDF (424K)
Paper ID: JTE12110J
DOI: 10.1520/JTE12110J

Vickers Hardness Indentations Measured with Atomic Force Microscopy
Jensen C., Jorgensen J., Garnaes J., Picotto G., Gori G.
Page Count: 7
Published: 01 November 1998
Abstract
Download PDF PDF (864K)
Paper ID: JTE12111J
DOI: 10.1520/JTE12111J

Evaluation of Mechanical Properties of Functionally Graded Materials
Marur P., Tippur H.
Page Count: 7
Published: 01 November 1998
Abstract
Download PDF PDF (328K)
Paper ID: JTE12112J
DOI: 10.1520/JTE12112J

Crack-Arrest Testing of Irradiated Nuclear Reactor Pressure Vessel Steels at the Oak Ridge National Laboratory
Iskander S., Milella P., Pini A., Manneschmidt E.
Page Count: 9
Published: 01 November 1998
Abstract
Download PDF PDF (1.4M)
Paper ID: JTE12158J
DOI: 10.1520/JTE12158J

A Neural-Based Analog IC Parametric Fault Diagnostic System with Discriminant Simulation Sampling
Wu A.
Page Count: 12
Published: 01 November 1998
Abstract
Download PDF PDF (560K)
Paper ID: JTE12113J
DOI: 10.1520/JTE12113J

Measurement and Interpretation of Fatigue Crack Growth in 7075 Aluminum Alloy Using Acoustic Emission Monitoring
Gong Z., DuQuesnay D., McBride S.
Page Count: 8
Published: 01 November 1998
Abstract
Download PDF PDF (1.1M)
Paper ID: JTE12114J
DOI: 10.1520/JTE12114J

A Testing Device for the Mechanical Characterization of Wood Beams or Plates Under Bending Compression
Mussot-Hoinard G., Ferron G.
Page Count: 5
Published: 01 November 1998
Abstract
Download PDF PDF (504K)
Paper ID: JTE12116J
DOI: 10.1520/JTE12116J

Evaluation of Three Methodologies for Testing Disposable ENT Endoscope Sheaths as Viral Barriers
Lytle C., Clavet C., Chaput M., Varney G., To T., Carey R., Carey R., Baker K.
Page Count: 7
Published: 01 November 1998
Abstract
Download PDF PDF (736K)
Paper ID: JTE12117J
DOI: 10.1520/JTE12117J

Creep Test of Cured-In-Place Pipe Material Under Tension, Compression, and Bending
Straughan W., Tantirungrojchai N., Guice L., Lin H.
Page Count: 8
Published: 01 November 1998
Abstract
Download PDF PDF (336K)
Paper ID: JTE12118J
DOI: 10.1520/JTE12118J

Effect of Loading Parameters on Post-Overload Fatigue Crack Closure
Verma B., Pandey R., Chinnadurai R.
Page Count: 7
Published: 01 November 1998
Abstract
Download PDF PDF (312K)
Paper ID: JTE12159J
DOI: 10.1520/JTE12159J

Effect of Construction Adhesive and Joist Variability on the Deflection Behavior of Commercial Wood Floors
Pellicane P., Robinson G.
Page Count: 8
Published: 01 November 1998
Abstract
Download PDF PDF (JTE12119J)
Paper ID: JTE12119J
DOI: 320K

Measurement of Fatigue-Creep Dynamic Back Stress and Strain Rate Equation of a Fe-Ni-Cr Alloy
He Q., Chen G., Zhang S.
Page Count: 2
Published: 01 November 1998
Abstract
Download PDF PDF (JTE12120J)
Paper ID: JTE12120J
DOI: 160K

An H²-Optimal Control of Random Loading for a Laboratory Fatigue Test
Ming L., Bing-Han X., You-Sheng W.
Page Count: 7
Published: 01 November 1998
Abstract
Download PDF PDF (JTE12121J)
Paper ID: JTE12121J
DOI: 360K