Volume 41, Issue 6 (November 2013)

    Modal Identification of Different RC Frames Using Experimental Measurements

    (Received 15 January 2013; accepted 25 March 2013)

    Published Online: 2013

    CODEN: JTEOAD

      Format Pages Price  
    PDF Version 8 $25   ADD TO CART


    Abstract

    The main purpose of this study is to determine dynamic characteristics, such as natural frequencies, mode shapes and damping ratios of reinforced concrete (RC) frames with low and normal strength concrete and compare them with each other using the operational modal analyses method under ambient vibration. For this purpose, full-scaled, one bay, and one-story RC frames with low and normal strength concrete are produced. The RC frames are vibrated by natural excitations with small impact effects, and the response signals are recorded using accelerometers during the tests. Measurement time-frequency span and effective mode number are determined by considering similar studies and literature. To obtain experimental dynamic characteristics, enhanced frequency domain decomposition and stochastic subspace identification methods are evaluated together. Results of ambient vibration tests show that dynamic characteristics change significantly depending on the material properties. It is shown that the ambient vibration measurements are enough to identify the most significant modes of RC frames as well. The first five natural frequencies are obtained experimentally for the RC frame with low and normal strength concrete between 14.99–155.20 Hz and 16.64–179.20 Hz, respectively. Dynamic characteristics should be verified using finite element analysis. Finally, inconsistency between experimental and analytical dynamic characteristics should be minimized by finite element model updating using some uncertain parameters such as material properties, boundary condition, and section properties to reflect the current behavior of the RC frames.


    Author Information:

    Arslan, Mehmet Emin
    Karadeniz Technical Univ., Dept. of Civil Engineering, Trabzon,

    Durmuş, Ahmet
    A. Durmuş, Karadeniz Technical Univ., Dept. of Civil Engineering, Trabzon,


    Stock #: JTE20130014

    ISSN: 0090-3973

    DOI: 10.1520/JTE20130014

    ASTM International is a member of CrossRef.

    Author
    Title Modal Identification of Different RC Frames Using Experimental Measurements
    Symposium , 0000-00-00
    Committee C09