Proper Selection of the Stiffness of the Disk Spring Pile Cap in Pile Driving

    Volume 29, Issue 2 (March 2001)

    ISSN: 0090-3973

    CODEN: JTEOAD

    Page Count: 6


    Zhou, L
    Wuhan University, Institute of Hydraulic and Electrical Engineering, Wuhan,

    Zhou, X
    Wuhan University, Institute of Hydraulic and Electrical Engineering, Wuhan,

    (Received 11 February 2000; accepted 17 October 2000)

    Abstract

    This article analyzes the relationships among the stiffness of the composite disk spring pile cap, the pile penetration, and the dynamic stress within the body of the pile, in pile driving. The range for proper matching between the stiffness of the composite disk spring pile cap and the stiffness of the driven pile is determined through optimization analysis of the pile-driving process.


    Paper ID: JTE12247J

    DOI: 10.1520/JTE12247J

    ASTM International is a member of CrossRef.

    Author
    Title Proper Selection of the Stiffness of the Disk Spring Pile Cap in Pile Driving
    Symposium , 0000-00-00
    Committee G02